Question about 1999 Toyota Corolla

1 Answer

Left turn signal not working Cleaned and replaced fuses and also changed out bulbs. When the signal is engaged, it blinks quickly and will not light on the panel or on the vehicle. If I barely touch it or push the lever just right, it will come on.

Posted by on

  • melandmaxroc Mar 10, 2009

    Thank you. I will check it out!


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

Hi

there is also an electronic device, which is called Flasher Unit. it seems like it has fried up, as well. you will have to have it changed

hope this helps
kind regards
RAhUL_hunk

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

1 Answer

Have a 2009 chevy cobalt. the left turn tail light even though not fused will not blink, and the left indicator light flickers too fast. the right though is working perfectly


Buy a two pack of turn signal bulbs. Change the front and rear left bulbs and try it out. If you're lucky, you're done and got away cheap. If not, start chasing electrons. Not an overly complicated circuit, the signal is quick flashing because you have an inoperative lamp.

Mar 14, 2015 | 2009 Chevrolet Cobalt

2 Answers

Turn signals not working


you must fit a matching set of bulbs front and rear check the bulb contacts may need cleaned.

Dec 26, 2013 | Dodge Ram 1500 Cars & Trucks

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Driver front turn signal does not blink. front


This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.

May 29, 2010 | 2001 Pontiac Aztek

1 Answer

Jaguar xj6 break light cancels signal


Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.

May 23, 2010 | 1989 Jaguar Vanden Plas

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

The right rear turn signal blinks quickly in a


I believe this car has a rear bulb that has two fillaments, one for side lights the other shared for braking and flash. sounds like a blown bulb or a bad ground connection. Check the bulb and the bulb holder and ground connection.
Turn signal blinking quickly generally indicates a blown bulb front or rear or bad connection.

Dec 20, 2009 | 1993 Mercury Cougar

Not finding what you are looking for?
1999 Toyota Corolla Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...