Question about 2000 Isuzu Rodeo

1 Answer

2000 isuzu rodeo no tail lights

Mpodeszek u asked me to clarify the problem. I'm not sure where I was supposed to reply because I'm new to this. I have an appt. tomorrow with an automotive electrical shop because I figured it was the wiring. Just thought it was something simple I could do myself. I'm not to familiar with wiring. The shop charges 90 bucks an hour so you can c my delay. thanks for responding.

Posted by on

  • Marc Podeszek May 11, 2010

    weezy go to a auto body shop with a certified mechanic

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 50 Answers

There is a separate fuse for the parking lamps and the instrument lamps. Have you checked these fuses?
Also there are many fuses in a box under the hood of the car. Check to see that there is not signs of water or corrosion in that box. Pull and reseat the fuse that supplies power to lighting in the power distribution fuse block under the hood.
The autoparts stores can supply you with the location of this unit and some information on which fuses control what circuits.
Check the fuses before you go to the shop.

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 2000 rodeo Isuzu drive side window fit in a 1999 rodeo Isuzu


  1. ask Isuzu that?
  2. or ask wrecking yard with Hollendar data base ( year fit facts)
  3. or ask car-parts.com. (dash is needed)
they can answer for any car, due to above. #2

May 04, 2015 | Isuzu Rodeo Cars & Trucks

1 Answer

1996 isuzu rodeo when hitting the brakes the running lites coms on


possibally a short and the most common area to cop a hard life is if it has a trailer plug check the condition of the wires and that they are secured properly . if ever thing is ok there check the rear tail light bulbs for defects as well. but your lookin for a short in the system so if you have altered any thing in the electrical system a quick check over that as well. rear earthing to tail lights should be checked as well

Feb 28, 2014 | 2000 Isuzu Rodeo

1 Answer

Brake lights work but not tail lights


Check your fuses. I'm betting if you have no tail lights, you have no dashlights either and that's a fuse. Also if you have trailer hitch & wiring, make sure trailer wiring isn't shorted or corroded

Jan 05, 2011 | 1996 Isuzu Rodeo

1 Answer

Isuzu rodeo tail light relay same as illumination relay under hood?


My 97 Rodeo had the same problem. No Tail lights, no. Dash lights. There is also an annoying buzzer that goes with the set telling you the lights are on, there is no key in the ignition and your door is open. (you don't notice it when it's gone but you sure notice it when it's back)
The Fuse (taillight Illum) was good, The Light relay under the hood was good and all bulbs were good.
What fixed this problem was replacing the tail light relay which is located in a panel just to the left of the brake pedal also called the kick panel.Inside there are 3 relays. I replaced the one in the middle and got everything to work.
If you need to identify the relay you can put your hand over it and then turn the lights on and off. The correct relay should click. Mine was the middle one.
Hope this helps someone because it stumped me for months.

May 20, 2010 | 2000 Isuzu Rodeo

1 Answer

Were is my ABS sensor located on my 2000 Isuzu Rodeo


there should be a sensor at all 4 wheels so make sure there all pluged in 

Jul 03, 2009 | 2000 Isuzu Rodeo

2 Answers

Brake light bulb


hi cjryan 9876 when you look on the outside of the lens there are 2 philips head screws & if open your tail gate there are another 2 philips head screws in there as well one of which is located through the locking tab for the tailgate once you undo these the tail light should fall out & then to get the tail light out of the socket give it a quarter turn anti clock wise

Dec 28, 2008 | 2000 Isuzu Rodeo

1 Answer

2000 Honda (Isuzu Rodeo) Check Engine Light ? 4 Codes, Misfire/Throttle/EVAP ?


Hi Jack,

I am not an expert and I don't have the codes in front of me with the meaning but I can offer some advice and hopefully it will solve your problem. First keep the print out of the codes and take it/them with you. Have someone check the oxygen sensor. It's possible that all of the codes you are getting lead up to the computer (electrical issue). I sure hope this helps. Good luck and let me know how things turn out.

Oct 17, 2008 | 2000 Isuzu Rodeo

1 Answer

2000 isuzu rodeo


i had the same problem with my wifes rodeo what you have to do is go into the housing for the bearing there is a washer that has 3 screws you need to take out. after you take it out there is a peice that has 5 holes put something in the holes to unscrew it i used needle nose pliers. once you get that piece out you can remove the rotor you may have to jiggle it a little but the rotor will come right off

Aug 12, 2008 | 2000 Isuzu Rodeo

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...