- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check to see if you installed the filter correctly.the filter will be marked with an arrow or will say inlet on it. correctly place the inlet side to the fuel tank side or the arrow going to the engine side. then if this was done correctly and u still have no fuel to engine the pump is damaged inside tank or trash has restricted the inlet strainer to the pump inside the tank. hope this will help!!!
Its normal for the pump to run for three seconds then shut off if the car engine is off. . This indicates that the fuel pump turned on and the pressure did reach specifications. If the pump did not reach pressure the pump would continue to run, You need to check for proper pressure with a gauge. If tthe pressure is ok then you have another issue like an ignition module or crank sensor if applicable. You may have to drive the car with the fuel gauge hooked up to see if you still have pressure when it dies.. I know you said you replaced the pump already but do you have the same issues as before you replaced it. This would indicate which direction you need to go now. If the same then its prabably not the pump.
I would check the fuel pump relay and the fuse for the sending unit and also would take the line off just in front of the fuel filter to see if I am getting fuel to that point but check the fuel pump relay and the fuse first