Question about 2005 Hyundai Tucson

4 Answers

How to change spark plugs on hyundai tuson? - 2005 Hyundai Tucson

Posted by on

  • SamW Oct 16, 2011

    location of the spark plugs

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

This is to a 2005, but you should be able to use this to find your solution.

click on your engine either 4 or 6 cylinders and then on the side click the engine electrical, then on spark plugs, you should be all set!

Posted on Mar 10, 2009

  • xdriver Apr 15, 2009

    This should help. I do not know why the link didnt come through before, but Autozone has manuals that show how to do jobs such as spark plug changes.

    Link

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's quite the pain the the **** as I did this last year.

on my six cylinder I had to take off the stabilizer bar across the top of the engine (The one running from fender to fender) and the aluminum intake as well as the speed control cables, and several sensor cables on and around the intake. What should be a 45 minute job takes several hours to do right. I never fully removed all the all cables from the intake. once it was loose enough to move around I just turned it sideways and moved it back enough to reach the back three plugs. Sorry I can't be more specific.

I'd consider letting the dealer do it next time if it's under $200 to do.

Posted on Mar 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This is for a V6 in a tiburon but same steps to do for the Tuscon as its the same engine.

http://www.newtiburon.com/forums/showthread.php?t=1760

This link also includes step by step pic's. This job will take you several hours to complete.

Posted on Mar 20, 2009

  • Bill McCrory
    Bill McCrory Jul 05, 2015

    This helped. It convinced me not to do it my self but instead let the mechanic do it at the shop. Thanks.
    It is also what I found out yesterday trying to do it my self. I gave up and put it back together before completing and had a beer, or two.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do I change my spark pluge on my V6 tucson 05

Posted on Sep 10, 2010

1 Suggested Answer

  • 6 Answers

SOURCE: how to change spark plugs on hyundai 2004 2.4L

Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

What to buy hyundai santafe or tuson


i think that santa fe is better then the tuson

Feb 25, 2014 | Hyundai Cars & Trucks

1 Answer

Changed head lights to hid lights now no lights


when iI spoke to hyundi about fitting hid conversions to my Tuson I was told that the engine management system would need updating and a special unit fitted called an ignitor to each headlamp....? I never bothered as the cost was extortionate.

Dec 08, 2012 | 2011 Hyundai Tucson

1 Answer

How do I change the oil pump?


https://www.google.com/search?q=oil+pump+on+2006+hyundai+tucson&espv=2&biw=1164&bih=614&tbm=isch&tbo=u&source=univ&sa=X&ei=VHhHVY_ANtHxggS-8oGoAQ&ved=0CEUQsAQ

Drive your Tuson upwards onto ramps or possibly lifts. You can implement a jack, but brace entry wheels so they don't really roll. Set the emergency break to be sure the car doesn't recede.
    1- Drain typically the engine oil and eliminate the negative battery connection. Take out typically the timing belt along with the oil pan. Take away the oil screen, your gasket, the petroleum pressure switch, your oil filter clump and gasket.
    2- Take away the plug cap in the oil pump perhaps the case with Method 09213-33000. Insert some sort of 0. 32 inch screwdriver throughout the plug hole whereas plugging the left side within the engine block. The screwdriver really should go in at a minimum 2. 4 in ..
    3- Pull through the pump made gear, the left counter top balance shaft bolt and therefore the front case mounting bolts. Note the program plans and locations within the bolt. Remove the way it is and gasket and then the two counter balance shafts out of your block.
    4- Separate that oil pump protect and gears with the case. Remove the screwdriver on the plug hole and eliminate the pump driven gear and then the left counter stabilize shaft bolt. Take the essential oil pumpcover belonging to the case. Install Brand new Oil Pump
      5- Assemble the Water pump and Timing belt and all other assemblies you had removed earlier.
      6- Fill the crankcase with the correct level. Start your Tuson engine and check out leaks.

Nov 10, 2012 | 2006 Hyundai Tucson

1 Answer

What do I need to service my Tuson


service every 12 months or every 10 k .service more if you do lots of stop start work .or at least have the oil and filter changed use fully synthetic oil .there is a full service interval section at the rear of the owners manual

Feb 03, 2011 | 2005 Hyundai Tucson

1 Answer

Airbag light is remaining on when the engine has started. I tryed to manually resetting by disconnecting the battery but this did not help. I have a 2005 hyundia tuson.


dealer only they use encrypted software on later models from 2005 and although you have a OBDII plug under dash its only for show or the american market for the emisions test ,The actual diagnostic plug is under the bonnet with a fancy shape thats copyrighted so no made up bits for aftermarket readers.Doesnt help general mechanics like myself much

Aug 28, 2010 | 2005 Hyundai Tucson

1 Answer

How to change gas pump in a 2006 tuson


replacing the fuel pump in this car requires that the fuel tank be removed from the car, u will need a good hydraulic floor jack and safety jack stands, the car needs to be at least 3 feet off the ground.

Jun 02, 2010 | 2006 Hyundai Tucson

1 Answer

How to change spark plugs on hyundai 2004 2.4L


Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.

Apr 30, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2005 Hyundai Tucson Logo

5,901 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...