Question about 1998 Chevrolet Tahoe

1 Answer

1998 Chevy Tahoe Need an exploded view of the head light on the passenger side can't figure out where to start to change the bulb. Needs a high and low beam change but it's behind the battary and a bunch of other stuff like the horn and looks like a support bar?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

When you raise the hood if you look at the top of the light you should see two round bars. They are silver in color. Pull gently on these towards the front of the vehicle. when they unsnap pull straight up on these. this should release the light. Make sure you are holding the headlight so it does not fall.

Posted on Mar 10, 2009

  • Glen McCart Mar 10, 2009

    Disregard the comments I made they were for a 99-up. Sorry

  • Glen McCart Mar 10, 2009

    Disregard the comments I made they were for a 99-up. Sorry



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the tail light fuse?


Rear Lights May Be Out Due To Failed Light Socket Plate ...

repairpal.com > Problems > GMC > Envoy
no tail light on passenger side. replaced tail light circuit board, fuses and bulbs. I havebrake lights ... 2003 GMC Envoy75,000Visitor. My brake light got ... How do I replace the high mount third brake light on a 2002 gmc envoy? The light does ...

Chevy Trailblazer- No Brake Lights! It's an easy fix.. - YouTube

? 12:22
https://www.youtube.com/watch?v=m0GkI5Jmrgo
Sep 7, 2014 - Uploaded by CheapGeek
My 2008 Chevy Trailblazer had no brake lights! It was ... Chevy Silverado 88-98 brake light switch replacement GMC Sierra tahoe Suburban ...

GMC Envoy XL: brake lights..the fuses and the bulbs..lights ...

www.justanswer.com > GM
images for 2003 gmc envoy wiring

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

I have a chevy tahoe 2000 lt 5.3 lt engine I'm


Pull out the bulb, it is probably black. You probably touched it with your finger when removing it or reinstalling it and it blew out, either that or the little tip on the bulb got broken off. Either way it will need to be replaced.

Sep 23, 2014 | 2000 Chevrolet Tahoe

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

How can i remove tail light assembly to change my bulb.in my Chevy Tahoe 2006.


2 screw, they are torx head, so you will need a torx driver, any parts store will have them to sell. remove the 2 screws and while pulling back, take your hand from the side and whack the light lens towards the middle of the truck, this will dislodge the clips.

Oct 20, 2009 | 2002 Chevrolet Tahoe

1 Answer

2002 Chevy Tahoe: Replacing Bulbs in Rear High Mount Stop Light?


Yes you can do this your self. When you open the back hatch their should be a way to take out the whole back light system, which then you can replace each individual light.

Jul 01, 2009 | 2002 Chevrolet Tahoe

1 Answer

Front headlight on 1998 chevy p/u how to change it.


Its just a bulb that needs to be replaced.Bring it by I can do it for about $30000.00.Just kidding HE HE!Pop the hood its one allen wrench looking screw to loosen to slide out the assembly,replace bulb,done.

Apr 25, 2009 | 1997 Chevrolet K1500

2 Answers

Changing headlight


how do i take out the head light on a 1989 chevy caprice

Apr 16, 2009 | 1989 Chevrolet Caprice

1 Answer

Change head light 1998 ford f150 extend ed cab


it's done from the inside of the passenger compartment... you may have to remove the battery first if it's on that side. oh and don't touch the bulb with your fingers ... it shortens the life of the bulb.

Robert

Please take a moment to rate this solution thanks

Jan 28, 2009 | 1998 Ford F150 Regular Cab

Not finding what you are looking for?
1998 Chevrolet Tahoe Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...