Question about Plymouth Voyager

2 Answers

94 Plymouth Voyager ABS light stays on

I have a 94 Plymouth Voyager. A couple of times in the past week or so the brake light has stayed on after getting out of the van. We had to spray WD40 on the pedal and pump it to get the brake light to go off. Now, the ABS light is on and staying on. When I press the brake hard, it feels like the back brakes are locking up. When I press the brakes down lightly it is fine.

Posted by on

  • lnthofmann Mar 10, 2009

    Thanks...I'll look into that. Do you think that would be whats now causing the ABS light to stay on and the feeling of locking up?

  • Anonymous Mar 17, 2014

    I have a 1999 plymouth voyager and my oil light comes on when ever I stop or press the brake but it goes off once I start driving. What is wrong with my van?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

Had a similar problem a number of years back. Underneath the brake pedal arm is a small switch with a plunger. when you press the pedal down it moves the plunger in and engages the brake lights. when you let off it's supposed to pop back out (turning the lights back off). Possible it is getting stuck in the down position and could need to be replaced. very easy to install and only about an 8 dollar fix.

Posted on Mar 09, 2009

  • artbesio
    artbesio Mar 10, 2009

    probably a seperate issue check the fuse for the abs and if it's not that try bleeding the brake lines.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Mine did that and adding brake fluid fixed it. Just a thought....

Posted on Jul 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my abs light stay on in my 2000 ply. voyager


In many cases, some dirt or other foreign substance has lodged around one of the ABS sensors. Starting with the front, remove the wheels one at a time and use either compressed air or and mild detergent solution in a sprayer to blow dirt from around the ABS sensors. After each wheel is done, re-check your brakes by starting the van and depressing the brake pedal. If this doesn't solve the problem, you have either a wire disconnected or broken to one of the ABS sensors, or a sensor is bad. You can take the van to one of the larger auto parts stores, and they will likely connect a code scanner to see if an ABS error code was set. If so, this code should determine which wheel is causing the light to come on. At that point, you'll have to decide whether to buy the parts recommended by the parts store to do your own repairs, or take it to a professional.

Sep 30, 2013 | 2000 Plymouth Voyager

1 Answer

Abs light stays on in dash. have been told this is a common problem with these models. where is brake control module located on 1998 plymouth grand voyager. 3.3. have been quoted $904 to fix. need...


Don't know how handy you may be but would seriously consider removing instrument cluster, and checking solder on circuit board. Just did mine, wasn't hard, maybe a couple of hours work. Nice small, pointed solder gun will be needed as well. They have had many weird problems with gauges, starting, running etc, all narrowed down to that printed circuit board, where the solder on the contact pins become corroded or cracked and cause some pretty weird stuff. At the very least, try removing dash enough to remove 4 screws holding cluster in, and pulling off connectors and putting them back on a couple of times, just in case it's just a dirty connection. If you decide you want to try it, and need more specific instructions, let me know, or even google , Dodge or Plymouth instrument cluster soldering, as there is some pictures and videos out there on the subject. Good Luck, and let me know how you make out.

Jan 29, 2011 | 1998 Plymouth Grand Voyager

1 Answer

1993 voyager V6 ABS light stays on


You might need a scanner to remove the fault code from the ECU's memory.

Sep 03, 2009 | 1993 Plymouth Voyager

1 Answer

1998 Plymouth Grand Voyager-sometimes the speedometer, gas gauge, etc stops working. sometimes hitting the top dash a couple times it may come back on, if the abs light stays lit i know to look at the...


It can be several things. Te simple one is that the connector behind the cluster is loose. The other is the circut board that makes up the cluster is going bad. Try disconnecting the cluster and re connecting. If this does not work, try replacing it with a sed one from a salvage yard or from ebay.

Jul 15, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Fixing brakes


Try bleading the brakes, sounds like you have in them. Than the ABS light should go out & you shouldn't have to worry about the fuses.

Jun 02, 2009 | 1993 Plymouth Voyager

1 Answer

Fixing brakes


you have a abs fault considering the year I of the van I would remove abs fuse or unplug the moduale to disaable it. the humming that you are hearing is the abs dumping pressure due to a false reading from one of the sensors or the moduale if you want to spend the money to make the abs work you will have to take it to a shop and have them hook up a computer to retreive the codes to diagnois the problem. keep in mind that with the abs dissabled the wheels will lock up when braking hard or slick roads let me know how you make out

May 31, 2009 | 1993 Plymouth Voyager

1 Answer

1993 Plymouth voyager--brake light on no power assist


Either ur Abs brains  shot which r located below the battery or u have a vacum hose unattached which there is about 4 runing all around the mastercylinder......but my guess would be the ABS ECU

May 30, 2009 | 1993 Plymouth Voyager

1 Answer

94 Voyager wont stay running when cold


you can have a gas line leak or most lilely a bad injector

May 06, 2009 | 1995 Plymouth Voyager

1 Answer

1999 Plymouth Voyager 3.3L brake light


Check the brake pads must be worn out .....

Good luck...

Nov 22, 2008 | 1999 Plymouth Voyager

2 Answers

Voyager tail lights stay on


brake light switch or a headlight switch

Nov 11, 2008 | 1995 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...