Question about 1996 BMW 318

1 Answer

Heater matrix (core) removal

Iv got a bmw 3 series cabby 318i 1996 can anyone help me iv got a problem removing my heater martix cause the plactic down pipes are stopping it comeing out .

Posted by on

  • danga_73 Apr 03, 2009

    thanks for the solution iv fitted a new matrix and everything is running fine cheers chris .

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • BMW Expert
  • 208 Answers

If I remember correctly, the heater pipes are actually 2 sectional pipes and are held together between the 2 sections with some small bolts. Unbolt the sections and see if that gives you enough room. Also, I think their may be an anti-vibration clamp around the pipes that holds it to the back of the case. Be sure to replace any o-rings you see when taking it a part and lubricate them with vasoline when reassembling.

Posted on Mar 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw heater


i see answers to other questions here except the question asked about no heat in a 325 xi 2001 blower works great fluid is full no leaks,fuses are fine,get a lil heat while at a stand still but as soon as you drive cold air only temp on max 91, engine temp right in the middle takes about 8 mins for temp gauge to reach the middle can anyone help with this..PLEASE !!!!!!

Jan 09, 2013 | 2001 BMW 3 Series

1 Answer

1996 bmw 3 series 318i ignition wont start


could be a problem with the security chip in the key.

May 23, 2010 | 1996 BMW 318

1 Answer

BMW RADIO


This should help follow the link instructions.

http://www.e90post.com/forums/showthread.php?t=9390

Feb 02, 2010 | 2008 BMW 3 Series

1 Answer

1994 BMW 318i Fuse Box layout


the fuses u are looking for are as follows:
From the top left first row its# 4
then the bottom row its # 19
I also wanted to point out. from 1989 to 1996 the brake switch was the common failure for bmw's
the series it included were 318i, 525-540i, and all 7 series. if the fuses dont fix it.. its the switch
located under a panel u need remove on the drivers side on the steering collum

Apr 25, 2009 | 1994 BMW 3 Series

1 Answer

BMW 318I front wheel nut


Stop by any tire shop and ask them to loosen them up for you and then put them on with a torque wrench. Someone has used an impact gun to put them on and you will need one to remove them. Most tire shops will do this for free.

Apr 05, 2009 | 1994 BMW 3 Series

2 Answers

Leaking coolant from behind engine on 96 BMW 318i sedan


have someone check out the intake gaskets also check the heater hoses coming from the heater core

Jan 20, 2009 | 1996 BMW 318

1 Answer

Misaligned headlamps of 1996 BMW 316i


there most be alignment scows at the back of the lamps

Jan 04, 2009 | 1996 BMW 3 Series

1 Answer

Cant find transmission dip stick in 1996 bmw 318i


this model does not come with a dipstick. does require special tool to remove transmission fill plug on the side of the transmission. just fill to the top of the fill hole.

Dec 27, 2008 | 1992 BMW 5 Series

1 Answer

2002 BMW 318I showing one reverse light


simply open the boot & remove the blown bulb & replace with a new one. the bulb is just a half turn holding in there so turn it anticlockwise & it should pop out.

Aug 13, 2008 | 2002 BMW 3 Series

2 Answers

Blower problem bmw 318i 1996


sounds like the resistor in the side of the blower unit has failed. try replacing that.

Aug 11, 2008 | 1993 BMW 3 Series

Not finding what you are looking for?
1996 BMW 318 Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...