- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the most common problem is lock solenoid (inside door) needs to be replaced. Before replacing try re-syncing locks. To do this, you need to lock all doors from passenger side, unlock from pass side, re-lock from pass side - then try drivers lock.
Check your power door lock fuse located underneath the drivers side steering wheel. Flip the fuse box cover over and there will be a diagram showing what fuse controls what component. When it burns out the power door locks will no longer work. If your fuse is ok then replace your power door lock actuator has gone bad. You will then need to remove your door panel and replace the PDL actuator with a new one.
you may just have a bad connection under the lock button under switch panel on your drivers door. check electrical plug in at door lock switch by removing that panel from driver door.it may be that you have to replace that door lock switch .thers only one fuse for door locks and if pass side works, it's not blown.
Any of these three causes may apply to your situation of your driver's door not power unlocking, specifically the malfunctioning of the 1) relay system, 2) switch motor, or 3) the switch/button itself. Here's a handy diagnostic article that explains this:http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Locks_Power_Locks_Do_Not_Lock_When_Pressing_Locking_Switch_Button.htmThis should lead you to the correction of your door's failure to unlock.Brad
Are you hearing any noises from the pass door when you activate the lock switch? If not, the power door lock solenoid has failed, and prob needs to be replaced. Pull the door panel & check to see if it is getting power to the solenoid in lock & unlock. If it has power, the solenoid is def bad.