Question about 1991 Oldsmobile Cutlass Ciera

2 Answers

How do I change out headlight bulb on 91 olds cutlass cierra

I have a 91 Olds cutlass cierra and can't figure out how to change out the bulb.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Oldsmobile Master
  • 2,007 Answers

Behind the headlight, you should see the nylon bulb holder. Turn it counter clockwise, about a 1/4 turn, and it should come out. Pull the old bulb straight out, and replace it with the new one. Don't touch the glass part of the new bulb with bare fingers, or you'll be replacing it again. Use cotton gloves or a paper towel. Put the holder back in the headlight, turn it clockwise until it locks.

Posted on Apr 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This ALSO works on other year models!!!
Mine is a 94 and it worked fantastically... less than 5 minutes.
Done!
:)

This answer should work in the following years and models:

Oldsmobile Cutlass Ciera 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996

Posted on Jul 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace dash lights on a 1993 olds cutlass cierra


You would need to remove the instrument cluster to get to the back side where the bulbs are.

Dec 07, 2012 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1994 olds cutlass cierra sedan with 125,000 mileage, service engine soon light came on, what's wrong?


Scan the computer for trouble codes. Use an OBD 1 scanner or code reader. The light having come on means there is a stored code or codes to direct you or a technician to the problem sensor or circuit.

Oct 25, 2012 | Cars & Trucks

1 Answer

Could someone have removed my pcv valve before I got the 91 olds cutlass cierra and it would still run?


Sure they could have.

BUT NOT LIKLEY.

The PVC valve is needed to clear the mixed gases from the crank case

RECOMENDATION:

Go to your local Parts store and have the attendant point out your PVC valve and replace it.

1991 is way past due for replacement.

Hope this tip helps.

R/
David

Feb 12, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

How do i replace a 1994 olds cierra lisence plate bulb


reach behind the lens and turn the rubber bulb socket to the right and the socket should come out,the bulb number is a 194.

Oct 31, 2009 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do you replace aheadlight light bulb ina olds


Remove plastic Grill (6 screws)
Remove Turn Signal Light (3 Screws)
This allows you to access the 4 screws that hold in the Headlight. Remove these and then remove the headlight. Once out, then just turn the bulb and remove. Be careful with the plastic clip that holds the bulb to the wiring harness. Since the car is old, the plastic will easily break.

Sep 20, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

How do I change the bulb/headlight on a 93 olds cutlass ciera


behind ur headlights u should c the plug with wires it unscrews by hand counter clock wise

Apr 08, 2009 | 1993 Oldsmobile Cutlass Ciera

2 Answers

1998 Olds Cutlass Headlight is out


There are two strange fasteners that hold down a faceplate.
89efbac.jpg

After you pull that up, there are two posts, that you pull up on. The assembly slides out.
67b277c.jpg


Apr 04, 2009 | 1998 Oldsmobile Cutlass

2 Answers

Fuel filter 1991 olds cutlass ciera


the filter is under the car twords the rear you will need a 5/8 wrench and a vise grip work best

Jan 11, 2009 | 1991 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1991 Oldsmobile Cutlass Ciera Logo

1,581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...