Question about 2005 Pontiac G6

1 Answer

Replacing radiator on 2005 Pontiac G6?

Does it come out of the top or bottom? thx.. any ideas on labor time would help 2.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Comes out of bottom. You need to remove the bottom cover. Then there is two radiator support brackets that need to be removed. Don't forget to remove the AC condenser bolts then lower it on down. Probably gonna take u a few hours to replace.

Posted on Apr 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I removed the tailgate door liner panel on a 2005 Suzuki Grand Vitara JB?? There is no inner door latch to be removed. We cannot open the rear door as outer handle has broken. Help....many thx

The top bezel pops off. There are usually 2 screws to remove from the top of the bottom bezel on each side. start popping the bottom bezel off the hatch. It won't come out. Screws on the bottom. But you can get if off enough to reach down and grab the latch rod or latch to release the hatch. Yes the latch is at the bottom. And it has levers to move to open the hatch. Once open, remove the screws to remove the bezel, then replace the latch.

Jan 05, 2017 | Suzuki Cars & Trucks

1 Answer

Cost for the labor in replacing rear shocks on a 2002 Kia Sedona?

They are basic shocks with a top and lower mount. Simplest way is get a neighbour with good DIY skills, a can of wd40, some basic tools, sockets etc. Shouldn't take an hour all told. The reason you need help is there may be a step one pair of hands cant do. Don't work under the car without jack stands if you have to remove the wheels. Make sure its well chocked. Soak the nuts top and bottom well before starting. If you have to go to a garage then it should take less than an hours labour.

Jan 31, 2015 | 2002 Kia Sedona

1 Answer

I have a 2005 PT crusier and my front crankshaft is leaking due to this oil is every where I will jave to replace all belts and possibly my alternator how much is a good price to get the crankshafe...

It is hard to tell you what is too much as it all depends on where you live and the shop rates where i live and what i charge is 60.00 an hour what i would normally charge on something like this would be as follows and all labor hours are from chiltons labor guide some shops use a different labor guide which gives them more time to do the job which means you pay more.But here is my labor costs front crank seal that all you need dont try to let them tell you you need the front crank replaced but front crank seal with turbo if your car has turbo would be 2.6 hours so you would multiply that times 60.00 if it does NOT have turbo then the labor hours would be 4.6. It is a good idea while you are doing this to have the timing belt replaced again with turbo 2.3 hours with out turbo 4.6 so you are looking at 4.9 hours with turbo and 9.5 hours with out turbo now these are only labor hours you will still need to factor in parts and labor hours for any additional parts you may want installed. I hope this will help you and give you an idea as to what your cost may run good luck.

Jun 18, 2011 | 2006 Chrysler PT Cruiser

2 Answers

Can the crankshaft position sensor in a 2005 Kia Sedona be replaced fairly easily, or should it go to a garage?

This is a fairly easy repair.It does not require any technical work at all.It is a job that should take a mechanically inclined person about two hours to accomplish in their garage of their house.Any other questions get back to me....Thx..

Dec 21, 2009 | 2003 Kia Sedona

3 Answers

How difficult is it to replace the starter on a 1998 Subaru Outback?

It is not as difficult to do for a determined and careful person who knows his/her ways.

1. Write done the code of your radio.
2. Disconnect the negative battery terminal.
3. Locate the positive (red) wire of the battery to where it ends, and remove it with a 12-mm socket and wrench. Remove the other thin positive wire attached to the solenoid.
4. Loosen and remove the starter-motor bolts with a 14-mm sockect and wrench. Then carefully take out the starter-motor.
5. Exchange the starter-motor for a rebuilt one at the dealer's or any competent autoparts store.
6. Reverse removal procedure for installation.

Dec 21, 2009 | 1997 Subaru Outback

1 Answer

ECT bottom on left side of the emergency lights

ECT power button is for extra power when towing or accelerating steep grades. What it does is make your transmission shift at a higher RPM than normal, hence you will get less miles per gallon but more power.

May 17, 2009 | 1997 Toyota RAV4

Not finding what you are looking for?
2005 Pontiac G6 Logo

Related Topics:

1,206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides