Question about 1993 Jeep Cherokee Country

1 Answer

1987 Jeep Cherokee pioneer, all gauges don't work

1987 Jeep Cherokee pioneer, all my gauges and radio do not work, any ideas???

Posted by on

  • Anonymous Mar 19, 2014

    Where is the headlamp relay on a 1987 jeep pioneer

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check your fuses under dash use test light ground it, your doing negative test ,test light on, fuse ok.
do that each of them you must turn your keys on don't start the car , in order to check.. good luck!!

Posted on Apr 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wire's don't match my deck I have a pioneer 45/4 into a1994 jeep grand Cherokee


no idea at all what that means.
the story is for sure longer seeing how its not stock.
and how it got that way.
gee.
what you do is go to the store, any auto store, even walfart
buy the adapter kit,
now it just plugs in , but wait the connect has pig tails
sure it does, it must
then go to pioneer.com and bet the free manual
then read the page on wire names.
and match the kit
its that simple. done many. actually ever-which way and ham radios too.

Nov 28, 2016 | 1994 Jeep Grand Cherokee

1 Answer

1987 jeep cherokee pioneer will crank and back fire out of the throttle body, what could it be


Misfires and backfiring through the intake is usually caused by incorrect ignition timing.

Dec 31, 2014 | 1987 Jeep Cherokee

1 Answer

96 Jeep Cherokee WON'T start My daughter's 96 Jeep


did you replace the ECu with a used one or new. if it a used one did you match it to the old.why di you change the ECU.? when you turn the key in the start position does the fuel pump turn on? does it crank? do you know if there is spark if you pull one spark plug wire?

Dec 04, 2012 | Cars & Trucks

1 Answer

Jeep stalls gauges don't work windows and locks and radio don't work


when you state it wouldn't crank, do you mean the starter won't engage or that it just spins over and doesn't start? if no gauges or no starter engagement, then check the battery, battery connections,and the starter for excessive amperage draw. if the starter spins and the engine won't start, then check crankshaft position sensor first. the crank sensor is a more common failure than the distributor or any of the other things you mentioned.

Jun 14, 2012 | 1998 Jeep Grand Cherokee

1 Answer

My 1987 jeep cherokee pioneer will start but then you drive to the store come back out and it will not start until it sets for 5 or 6 hours..


You may have a faulty ignition coil. Check to see if system is firing when it won't start. If you have fire it is probably fuel pump.

Aug 08, 2011 | 1987 Jeep Cherokee

1 Answer

The gauge cluster stopped working my radio works but nothing else


remove cluster clean terminals with dielectric cleaner then coat pins with dielectric grease that shoul do it

Jun 23, 2009 | 1996 Jeep Cherokee Country

1 Answer

'87 Cherokee no horn, turn signals, brake lights, wipers, blower


Pull the fuses and check the socket for power on the things that don't work. If there is no power at the fuse box there is a good change the stater igintion switch is toast. it is located on top of the steering colunm under the dash.usally less then 20 bucks All that you mentioned get power from this switch that goes to the fuse panel when you turn the key on

Jun 14, 2009 | 1987 Jeep Cherokee

1 Answer

1987 Jeep Cherokee Chief power windows do not


jeep cherokee laredo 1987 problema que cuando suve una pendiente empiesa a vibrar.

Mar 15, 2009 | 1987 Jeep Cherokee

1 Answer

Jeep Grand Cherokee loses power while driving.


Loose or dirty ground connection at battery area.

Jan 25, 2009 | 1998 Jeep Grand Cherokee

2 Answers

1990 jeep cherokee pioneer


Radiator may be plugged up inside or a bad headgasket. Try the radiator first since it is far easier.

May 28, 2008 | 1990 Jeep Cherokee Limited

Not finding what you are looking for?
1993 Jeep Cherokee Country Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...