Question about 2008 Chevrolet Hhr

1 Answer

Installing fog lights oem 09' hhr is wiring there now or do i have to completly wire from scratch?

Posted by on

  • Anonymous Mar 22, 2014

    how to install oem fog lights

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 294 Answers

NO YOU WONT HAVE TO REPLACE ANY WIRE THAY SHOULD JUST UNPLUG THEN PLUG IN THE NEW FOG LIGHTS

Posted on Mar 09, 2009

1 Suggested Answer

  • 57 Answers

SOURCE: 09' hhr fog light wiring

You will need to completely wire your own setup. The "stock" fog lights on the HHRs are wired through the Body Control Module computer which can not be reprogrammed without being replaced. Cost of the computer is over $300 and certainly NOT worth it for a set of fog lights. Put in your own switch, wiring, etc. I would highly recommend that you use a relay to power them since the electrical system for the HHR is very sensitive to external additions.

Posted on Jun 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Camry fog lights wiring diagram


this link says 2010, but if you look at the diagrams its for a 09 , I couldn't copy and paste the diagram, so heres the link http://answers.edmunds.com/question-2010-Toyota-Camry-fog-light-wiring-diagram-91027.aspx

Aug 09, 2011 | 2000 Mercury Cougar

1 Answer

How to install original factory fog lightson ford escpae xls 2010 I purchase the original fog lights butcanot find the harness or connectors. Do I need to purchase another harness?


hi when you purchased these they should have come with a wiring kit supplied, if not then you will have to go to ford and ask them for the wiring kit for them, on most replacement fog lights not ford made come complete with wiring included...hope this helps

Aug 01, 2010 | 2008 Ford Escape

1 Answer

HOW TO INSTALL 2007 CAMRY FOG LIGHTS


make sure you have holes in bumper you can run wires through firewall and tie into fuse block+pos wire goes to at least a 20amp fuse and other side toswitch +pos wire from lights goes to other side of switch -neg wire goes to suitible body ground in engine compartment fender bolts use eyelet conector or you can attach to neg term of battery.royedwardtat

Jul 13, 2009 | 2007 Toyota Camry

1 Answer

How to install OEM 2007 camry fog light? The wirings I know how to do it, but I need help how to install/mount the fog light Thanks!


Follow the link below to find with picture and step by step instruction to mount the foglights. It's lot easy than connecting the wires.
http://meandmycamry.freeservers.com/photo.html

For me I managed to install the foglights but not sure how to connect to the power and bring the wire to the dashboard. My car didn't come with wiring connections for foglights. Would appreciate if someone can help me with that ( possibly instructions with pictures), Thanks.

Jun 24, 2009 | 2007 Toyota Camry

1 Answer

09' hhr fog light wiring


You will need to completely wire your own setup. The "stock" fog lights on the HHRs are wired through the Body Control Module computer which can not be reprogrammed without being replaced. Cost of the computer is over $300 and certainly NOT worth it for a set of fog lights. Put in your own switch, wiring, etc. I would highly recommend that you use a relay to power them since the electrical system for the HHR is very sensitive to external additions.

Mar 09, 2009 | 2008 Chevrolet Hhr

2 Answers

I need a wiring diagram for fog lights oem to my toyota


The link below is a Typical fog lamp / driving lamp hookup. Keep in mind that in most states, for these lamps to be 'legal' (and thus pass inspection), you must wire them such that:

1. You can cut them off (in other words, there must be a switch installed to turn them off)

and

2. They may only be operated with the low beams. (therefore, you must power your on/off switch from the low beam circuit)

http://www.accessconnect.com/fog_driving_lights_wiring.htm

Feb 28, 2009 | 2005 Toyota Corolla

1 Answer

Wiring harness for fog lights?


Just contact your local dealer and ask them for instructions for the OEM fog lamps. I have ordered Honda fog lamps, and you can usually find a pdf document on line with detailed instructions. The nice thing about Honda accessories, is the harnesses will only plug in one way. Hope this helps

Feb 26, 2009 | 2006 Honda Accord

2 Answers

Hhr fog lights


yes it is you will probably have to have the bcm programmed for the foglight option if your gonna install like factory is

Sep 22, 2008 | 2007 Chevrolet HHR Special Edition

1 Answer

Need wiring shematic for fog lights 2005 toyota corolla


im pretty sure these cars were already prewired for fog lights .there should be some plugs behind the bumper to fit them.if not get back i will explain how to wire them up.best of luck.

Sep 04, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

869 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...