Question about Daewoo Lanos

3 Answers

How to dismantle dashboard and fit heater core

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

The link for the manual would be


http://pdftown.com/PDF-Daewoo-Lanos-Parts-Manual.html

You can check in this file regarding the query you have...

Thanks for using Fixya.

Posted on Mar 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

The heater coil is in the front side of the dashboard. can be reached from the bonet.
kevin

Posted on Mar 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 19,396 Answers

You need to remove the car stereo , and the glove compartment box to access the heater core located behind, I will see if I can find more detailed instructions with pictures.

Posted on Mar 09, 2009

  • Ginko
    Ginko Mar 09, 2009

    You need to take apart the whole dashboard, starting from the glove boax on passenger side and car stereo, the heater core is approssimately located behind the car stereo and passenger side compartment.
    You do not need to remove the instrument panel to access the heater core, however the job would take 4 or 5 hours to an expert mechanic.

    I did not find the illustrated procedure for your Daewoo, if you want pictures for the specific model you can order the haynes manual for about $15/$20 .

    Here the replacement on a chevy.

    Volvo, similar to Daewoo: Heater Core Replacement

    Dodge.



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do the heater hoses disconnect from the heater core?


Heater hoses are clamped on the heater core.. To gain access you might have to remove the dashboard if you do not have access through the glove box area. Screw driver will loosen the clamp for hose removal.

Nasty job.

Jul 13, 2015 | 2003 Chevrolet TrailBlazer

2 Answers

Have 2004 Ford Escape with a brooken heater hose


Connect the hose to an obvious sized recepticle, and test it.

Jun 27, 2015 | 2004 Ford Escape

1 Answer

Replace heater core


Instructions
    • Drain the cooling system. Draining the cooling system will prevent toxic engine coolant from leaking into the passenger cabin of the vehicle during removal of the heater core. To drain the cooling system, simply disconnect the lower radiator hose from the radiator by loosening the hose clamp and pulling the hose off. Be sure to drain the fluid into a sealable container and dispose of the coolant at an appropriate disposal site.
    • 2Pull the dashboard six inches rearward. In order to do this, you must remove the following parts; the center dash bolt (located under the defroster vent cover), the bolts under the driver and passenger kick boards, the bolt connecting the dashboard to the radio mount, and the the bolt connecting the dashboard to the rear of the glove box. The locations of these bolts are immediately apparent upon looking under the dash. Once you have removed these bolts, you can pull the dashboard rearward and secure it.
    • 3Remove the heater core box. The heater core box is a black plastic box that surrounds the heater core. This part should be visible when looking down into the dashboard from the passenger side seat. Remove the two bolts on top holding it to the firewall and another on the bottom near the foot well. After removal of these bolts, the heater core and box are attached to the vehicle only by the coolant lines, which you can now disconnect by reaching into the box and pulling them off of the heater core (you may have to loosen the clamps first).
    • 4Install the new heater core. This is accomplished by applying steps 1 through 3 in reverse order; re-connect heater core coolant line, re-install heater core box (be sure to apply silicon sealant to the edges of the box, hermetically sealing it), replace the dashboard and install bolts, and re-fill the cooling system.



Oct 22, 2012 | 1999 Chrysler 300M

1 Answer

Remove_dashboard for nissan sentra 2003 heater core


check under the hood first. some cars have the heater core in the engine compartment, attached to the firewall. find the heater hoses and follow them from the block to the firewall. if they go into the firewall, then the heater core is under the dashboard.

Nov 29, 2011 | Cars & Trucks

1 Answer

Friends got a pool of coolant forming in the back of her car whats the cause of that?


If the vehicle has a rear passenger heater, it may be that the coolant is leaking from the heater core or one of the hoses connecting the heater with the engine cooling system so you would need to get under the vehicle and visually check. This may also be a leaking heater core under the dashboard and the coolant is flowing over or under the carpet and pooling in the rear footwell.
Check for damp or wet spots in the carpet from the front to the rear of the vehicle with your hand and carefully check around the area where the heater core is mounted, this is usually undr the centre of the dash or behind the glove box. If this is found to be the area of the leak then the heater core will need to be removed and replaced or repaired. Removing the heater core is quite a daunting job as nearly all of the dashboard and fascia have to be removed along with all the electrical items mounted in this area. You may be able to bypass the heater core by connecting the two heater hoses under the bonnet together with a small length of pipe and then check to see if the coolant returns to the footwell. If it does not then the core is faulty. if it does then the issue may be in the rear heater (if fitted) and should be bypassed and checked in the same way.

Mar 08, 2011 | 1998 Volvo S70

1 Answer

How to replace a heater core


Heater Core Removal & Installation Front To Remove:
  1. Make sure you have the anti-theft codes for the audio and the navigation system, and then write down the audio presets.
  2. Disconnect the negative cable from the battery.
  3. From under the hood, disconnect the heater valve cable from the heater valve. Turn the heater valve arm to the fully opened position.
  4. When the engine is cool, drain the engine coolant from the radiator.
  5. Disconnect the inlet heater hose and the outlet heater hose from the heater core.
  6. Remove the mounting nut from the heater unit. Take care not to damage or bend the fuel lines, the brake lines, and related parts.
  7. Remove the dashboard.
  8. Remove the evaporator.
  9. Remove the mounting bolts and remove the heater unit. Front heater unit honda-10-00-4128.gif

  10. Remove the self-tapping screws and the clamp.
  11. Carefully pull out the heater core so you don't bend the inlet and outlet pipes.
Front heater core honda-10-00-4129.gif

To Install:
  1. Using care, install the heater core to the heater unit and secure.
  2. Using care, install the heater unit and tighten mounting nuts and bolts to 7 ft-lb (10 Nm).
  3. Install the evaporator.
  4. Install the dashboard.
  5. Connect the inlet heater hose and the outlet heater hose to the heater core.
  6. Connect the heater valve cable to the heater valve.
  7. Refill the cooling system with engine coolant.
  8. Adjust the heater valve cable.
  9. Make sure that there is no coolant leakage.
  10. Make sure that there is no air leakage.
  11. Connect the negative battery cable.
  12. Perform the power window control unit resetting procedure.
  13. Enter the anti-theft codes for the audio and the navigation system, and then enter the audio presets.
Rear To Remove:
NOTE: The rear blower motor, the rear heater core, the blower screen, the rear blower resistor (heating/air conditioning system) and the rear power transistor (climate control system), the rear air mix control motor (climate control system) , the rear mode control motor and the rear expansion valve can be replaced without removing the rear heater-A/C unit.
  1. Remove the self-tapping screws and the clamp, and then remove the bolts and the rear evaporator lines with the rear expansion valve. If necessary, remove the rear expansion valve. Use a second wrench to hold the other fitting on the valve so the rear evaporator lines won't twist. Leave the first fitting loosely connected so you can use it to hold the valve while you loosen the second fitting.
  2. Remove the rear heater hoses.
  3. If necessary, remove the rear blower motor, the rear heater core, the blower screen, the rear blower resistor (heating/air conditioning system), the rear power transistor (climate control system), the rear air mix control motor and the rear mode control motor.
  4. Remove the self-tapping screws and the lower housing.
  5. Remove the self-tapping screws, and carefully separate the left upper housing from the right upper housing. Remove the rear heater core.
Rear evaporator assembly honda-10-00-4116.gif

To Install:
  1. Replace the rear heater core.
  2. Attach the heater hoses.
  3. Make sure no air is leaking from the left upper housing and the right upper housing fitting and from the upper housings and the lower housing fitting.
  4. Before reassembly, make sure that the rear air mix control linkage and door move smoothly without binding.
  5. Before reassembly, make sure that the rear mode control linkage and door move smoothly without binding.
  6. Reassemble the housing.
  7. After reassembly, make sure the rear air mix control motor runs smoothly.
  8. After reassembly, make sure the rear mode control motor runs smoothly.
  9. Refill the cooling system and make sure that there is no coolant leakage.
prev.gif next.gif

Oct 16, 2010 | 2005 Honda Pilot

1 Answer

Need more information on how to remove the blower.


If the blower you're referring to is the one for the dashboard, then you need to dismantle the glove box door and the panel behind it. This should give you access to the heater core, and the blower should be bolted to the side of that.

Jan 02, 2010 | 2006 Cadillac Escalade

2 Answers

Water accumulates on the floor in the passenger rear


your heater core is going out on the car...its leaking water into the car

Jan 28, 2009 | 1991 Lincoln Town Car

1 Answer

Replacing a heater core


YOU DO NOT NEED TO REMOVE THE DASH BOARD. IT WILL BE BEHIND THE GLOVE BOX. LOOK UNDERNEATH THE DASH AND YOU WILL NEED TO REMOVE A PANEL TO GAIN ACCESS TO THE HEATER CORE. THE PANEL WILL BE ABOVE THE PASSENGERS FEET ON THE FIREWALL.

Jan 24, 2009 | 1991 Chevrolet Cavalier

2 Answers

Need instruction on installing heater core for 2000 jeep cherokee




The heater-A/C housing assembly must be removed from the vehicle and the two halves of the housing separated for service access of the heater core, evaporator coil, blend-air door, and each of the various mode control doors.

WARNING: On vehicles equipped with airbags, refer to Airbag Systems Safety Information and Procedures. Before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury. See: Restraint Systems\Air Bag Systems\Service Precautions

REMOVAL
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel from the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard / Instrument Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
  3. If the vehicle is not equipped with air conditioning, go to Step 6. If the vehicle is equipped with air conditioning, recover the refrigerant from the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Recovery, See: Service and Repair\Refrigerant System Recovery
  4. Disconnect the liquid line refrigerant line fitting from the evaporator inlet tube.
    • Install plugs in, or tape over all of the opened refrigerant line fittings.
  1. Disconnect the accumulator inlet tube refrigerant line fitting from the evaporator outlet tube. See Refrigerant Line Coupler for the procedures.
    • Install plugs in, or tape over all of the opened refrigerant line fittings.
  1. Drain the engine cooling system.
  2. Disconnect the heater hoses from the heater core tubes. Install plugs in, or tape over the opened heater core tubes.
  3. Unplug the heater-A/C system vacuum supply line connector from the tee fitting near the heater core tubes.
  4. Unplug the heater-A/C unit wire harness connector, which is fastened to the heater-A/C housing next to the blower motor relay.
    1. Remove the five nuts from the heater-A/C housing mounting studs on the engine compartment side of the dash panel. Remove or reposition the evaporation canister for additional access, if required.
    2. Pull the heater-A/C housing rearward far enough for the mounting studs and the evaporator condensate drain tube to clear the dash panel holes.
    3. Remove the heater-A/C housing from the vehicle.
    INSTALLATION
    1. Position the heater-A/C housing to the dash panel. Be certain that the evaporator condensate drain tube and the housing mounting studs are inserted into their correct mounting holes.
    2. Install and tighten the five nuts onto the heater-A/C housing mounting studs on the engine compartment side of the dash panel. Tighten the nuts to 6.2 Nm (55 in. lbs.) .
    3. If the evaporation canister was repositioned during the removal procedure, reinstall it to its proper position.
    4. Connect the Heater-A/C system vacuum supply line connector to the tee fitting near the heater core tubes.
    5. Unplug or remove the tape from the heater core tubes. Connect the heater hoses to the heater core tubes and fill the engine cooling system.
    6. If the vehicle is not equipped with air conditioning, go to Step 10. If the vehicle is equipped with air conditioning, unplug or remove the tape from the accumulator inlet tube and the evaporator outlet tube fittings. Connect the accumulator inlet tube coupler to the evaporator outlet tube.
    7. Unplug or remove the tape from the liquid line and the evaporator inlet tube fittings. Connect the liquid line coupler to the evaporator inlet tube.
    8. Evacuate the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Evacuate, See: Service and Repair\Refrigerant System Evacuate
    9. Charge the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Procedures, Refrigerant System Charge, See: Service and Repair\Refrigerant System Charge
    10. Install the instrument panel in the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard / Instrument Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
    11. Connect the battery negative cable.
    12. Start the engine and check for proper operation of the heating and air conditioning systems.
REMOVAL AND INSTALLATION

WARNING: On vehicles equipped with airbags, refer to Airbag Systems Safety Information and Procedures. Before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury. See: Restraint Systems\Air Bag Systems\Service Precautions

  1. Remove and disassemble the heater-A/C housing. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service and Repair, See: Heating and Air Conditioning\Housing Assembly HVAC\Service and Repair
  2. Lift the heater core out of the lower half of the heater-A/C housing.
  3. Reverse the removal procedures to install. Be certain that the heater core foam insulator is reinstalled

Jan 18, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...