Question about 2005 Ford Ranger

2 Answers

Will a 2005 engine wk in a 2004 truck

Ive got a 2004 ford ranger xl 5 speed 2.3 lt engine , the original engine blew up form a accident, i got a 2005 2.3lt engine and installed the engine, the engine runs great the only problem i have is bad fuel milage, ive tryed everything form replacing fuel filter, flushing fuel lines, testing injuectors, tested fuel pump and relays everything checks out good, the only thing thats diffrent on the engine wiring harness is a plug on the back of the cylender head i dnt know what its for ive looked every ware short of taking it to a dealer,(cant afford to take it in). the computer shows no faults, could the problem lie in the computer i did my reserch on the diffrences between the 04 and 05 engines and everything is the same between the 2 just the 05 has 5hp more than the 04. im thinking that the 05 may have a higher fuel pressure than the 04 or larger injectors if so the fuel pump cant keep up and causes it to work harder witch would cause the problem but not sure, any help wd be welcome even ideas that i can try thanks for your help
jeff

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,471 Answers

What about ignition system--plug wires get worn inside--------the boots cud be bad-------ign module may hav problems------02 sensors also-----just cause theres no codes dont explain it------vacuum problem or egr valve -common also-------the computer mite need to be reprogramed to fit-ask majicmech@aol.com

Posted on Oct 30, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Jeff The best thing I can tell you is have Ford Body shop to take a peak at it. They may charge you a hr but after you get the info then go do it yourself buddy, Just explain what you did and what youve replaced ok'

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes engine to ABRUPTLY shut off while driving ?


2004 Ford Explorer Engine Stalls/Cuts Out While Driving: 31 ...

www.carcomplaints.com/Ford/Explorer/.../engine/engine_stalls_cuts_out...
... 2013 · 2012 · 2011 · 2010 · 2009 · 2008 · 2007 · 2006 · 2005 · 2003 · 2002 · 2001 · 2000 ... 2004 Ford Explorer engine problems: engine stalls/cuts out while driving ...to overheat and slide out of its socket, causing the engine to shut off. ..... Suddenlyat 30-35mph, my engine just died and i cannot control the steering wheel.

2005 Ford Escape Engine Shutdown While Driving: 24 ...

www.carcomplaints.com/Ford/.../engine/engine_shutdown_while_drivin...
The 2005 Ford Escape has 24 complaints for engine shutdown while driving. ...January 22: Ford Ranger Driver Killed by Takata Airbag in South Carolina news ' 2 days ago; Ford Focus Door Latch ..... I was 80 miles from home when the engine shut off. .... No one could seem to determine the true cause of the problems.

Ford Ranger Stalling/Dying Problems - Edmunds.com

forums.edmunds.com > Ford > Ford Ranger

Nov 2, 2007 - 31 posts - ‎21 authors
Learn more about Ford Ranger at the Edmunds.com Car Forums! ... cut off a couple of times then it started happening more frequent while driving. ..... the other day I was driving down the highway and it just shut off, no warning .... 2000. when it gets overheated the circuit shorts and causes the engine to die. Ford Expedition engine cutting off while driving
31 posts
Oct 24, 2009
Mercury Mountaineer Start Stall Idle Problems
31 posts
Oct 1, 2007
More results from forums.edmunds.com

Jan 27, 2016 | 2003 Ford Ranger Regular Cab

1 Answer

Need a firing order picture for a 2001 ford ranger with a 3.0


Here you are:
Note: this is not mine, I simply C&P from another specialty site.

"Firing order for Ford Ranger 3.0L engine 1993 thru 2005 1-4-2-5-3-6; Cylinder
numbers front of vehicle to rear: Right (driver's) side = 4-5-6; left (passenger) side = 1-2-3.
Distributor rotates clockwise. Hope this helps."

Mar 21, 2015 | 2001 Ford Ranger

1 Answer

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above.
Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above. <br />Corsa 1.4I Engine code Z14XE <b>2000-2004</b><br />Bolts must be renewed<br />stage 1. 25Nm<br />stage 2, + 90 degrees<br />stage 3. + 90 degrees<br />stage 4. +90 degrees<br />stage 5. + 45 degrees<br />Sequence<br />10 6 2 3 7<br />9 5 1 4 8<br />bolts 7 & 8 are nearest to the flywheel side of the engine<br />Engine code C14NZ <b>1993-1998</b><br />Stage 1. 25Nm<br />stage 2. + 60 degrees<br />stage 3. +60 degrees<br />stage 4. + 60 degrees<br />Sequence as above.

Jan 09, 2013 | Opel Corsa Cars & Trucks

1 Answer

Spark knock i think under loads or up hills 91 ford ranger 4.0liter 5 speed manual.


Your timing could be too far advanced, EGR valve could be stuck closed, engine could be getting too hot (antifreeze leak or stuck thermostat), or there could be excessive carbon buildup on top of your piston, causing a hot spot.

The most common cause ive found is a dirty or defective mass air flow sensor. You can try removing the sensor and cleaning it first.

Mar 29, 2010 | 1991 Ford Ranger Supercab

1 Answer

Need wiring diagram for spark plugs for 2005 ford ranger


I do not know if you have the 3.0L or 4.0L Engine, regardless they have the same diagrams.

For the 3.0L AND 4.0L:
Firing Order:
1-4-2-5-3-6
Cylinders:
(back of engine)
3-------------6
2-------------5
1-------------4
(back of engine)
Ignition Coil:
(back)
3...4
2...6
1...5
(front)

Let me know if this helped...

Mar 16, 2010 | 2005 Ford Ranger

1 Answer

Coil and spark plug diagram for 2004 Chevy Impala


I do not know if you have the 3.4L or 3.8L Engine; however, I have included both below:

For the 3.8L V6:
Firing Order:
1-6-5-4-3-2
Cylinders:
(back of engine)
2------4------6
1------3------5
(front of engine)
Ignition Connections:
(back)
o <----6
o <----3
___
o <----2
o <----5
___
o <----4
o <----1
(front)

For the 3.4L:
Firing Order:
1-2-3-4-5-6
Cylinders:
(back of engine)
2-----------1
4-----------3
6-----------5
(front of engine)
Ignition Connections:
.........(back)
.|.5..2.|.|.3..6.|.|4..1.|
.........(front)

Let me know if this helped....

Mar 11, 2010 | 2004 Chevrolet Impala

1 Answer

NEED FIRING ORDER FOR 2004 FORD RAnger 3.0l


For the 3.0L
Firing Order:
1-4-2-5-3-6

Cylinders:
(back of vehicle)
3-------6
2-------5
1-------4
(front of vehicle)

Ignition Coil:
(back of vehicle)
3-----4
2-----6
1-----5
(front of vehicle)

Nov 29, 2009 | 2004 Ford Ranger

Not finding what you are looking for?
2005 Ford Ranger Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...