Question about 1988 Ford Bronco

1 Answer

Tailgate window motor

What all different vehicles have the same window motor as the tailgate on an 88 Bronco?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

I believe almost all broncos from 85 or 86 up to at least 94 should be the same.

Posted on Sep 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 FORD BRONCO. REAR WINDOW STUCK IN UP POSITION AND MOTOR IS DEAD. HOW DO I GET THE WINDOW DOWN SO THAT I CAN DROP THE TAILGATE?


you have to climb over back seat and pull panel off tailgate pull the motor out and let window down by hand .

Sep 16, 2012 | 1989 Ford Bronco

1 Answer

Rear window on my 1987 ford bronco will not work


This has several possiblilitys, it could be the switch in the dash has gone out even if it does not work with the key in the tailgate. other possible item could be the window motor or a sensor that detects if the gate is up or down. check motor wires for power when the switch is activated by pulling off the panel on the tailgate, if it is getting power i would suggest replacing the motor. if not you may have to trace wires to the drivers side of the tail gate and find the sensor.i had to by pass mine a while ago. makes it much easier to clean the glass on the inside cause the window will roll up with the gate down.

May 10, 2010 | 1987 Ford Bronco

1 Answer

Have a 1992 Ford Bronco Eddie Bauer Tailgate window motor problem


I looked at my schematics, and they don't show a relay. They do, however, show two ground wires coming out of the tailgate window switch. There is a ground wire for the "up" side of the switch, and a ground wire for the "down"side. These would be color-coded black, and I think that it is worth checking to make sure you don't have a corroded /broken ground running from the tailgate switch. If only one grounding wire was broken, the window would operate in only one direction. Both dash and tailgate switches share the same wiring circuit, and these wires are "hot" all the time. It's normal when you get both sides of the motor leads at 12VDC when neither switch is activated. These switches function by switching off one of the two motor leads, and connecting it to ground, thus allowing power to flow thru the motor windings. Of course, reversing the polarity on a DC motor will change the direction of rotation, so changing which black lead is switched to ground gives the up or down direction to the motor.. since you can read schematics, you might check out ebay for a used Haynes manual cheap. hope this helps

Apr 29, 2010 | 1992 Ford Bronco

1 Answer

How do you remove the rear window motor in the tailgate of my 89 ford bronco. I took off the inside panel to be able to see the inside but from there don't see the motor and how to get further into the...


there is about 3 rivets that you have to cut off,that holds the window motor and regulator to the tailgate,then shift the window back and forth to get the track slides to slide out then pull the window out slowly,it will catch when its almost out so be careful.

Nov 13, 2009 | 1989 Ford Bronco

1 Answer

1996 Ford Bronco Tailgat assembly


only place to get an assembled tailgate will be the junk yard unless u pay someone to switch everything for you

May 01, 2009 | 1996 Ford Bronco

1 Answer

How do i roll my window up in the tailgate of my 1984 bronco if the elctric switch is not working


my switch went out on my 88 bronco and i spliced into the wires going to the window motor and wired a switch straight off the battery.

Apr 25, 2009 | 1988 Ford Bronco

2 Answers

Rear Window in 1990 Ford Bronco


you could run a 3 way switch of some kind. but i would try looking in the access panel and finding the safety switch either right on the bottom of the handle or the drivers side tailgate latch. they are known to go bad.you can replace it but i pulled mine out and jumped it with a piece of wire works fine now

Feb 28, 2009 | 1987 Ford Bronco

1 Answer

Tailgate window doesnt work


It could be several things. Make sure the tailgate is latched all the way. The motor could be bad. remove the tailgate cover inside the truck. use a test light and have someone press the up and down button while checking for power at the motor wiring. If you have power going to motor on both sides ,the motor is bad. If you do not have power check for broken wiring or bad switches.

Feb 01, 2009 | 1993 Ford Bronco

1 Answer

Replace motor on tailgate window on a 1987 ford bronco


You will likely have to remove the panel from the inside with the window up. Once you have the panel off I would try to have some one hold down on the switch while you tap the motor with a hammer. Of course make sure the latches are all the way closed as if the door is not closed all the way the window will not roll down as it has safety switches to keep this from happening.

If you still can not get it down then you will need to unbolt the regulator and let it down that way.

Jan 14, 2009 | 1987 Ford Bronco

1 Answer

Tailgate window motor


You must detrim the tailgate and then remove the glass and then the entire regulator assembly must be pulled to change out the motor.

Nov 21, 2008 | Ford Bronco Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...