Question about 2000 Oldsmobile Intrigue

2 Answers

On my 2000 oldsmobile intrigue the anti lock and brake light won't go out

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 1,000 Answers

The lights are indicating you have an ABS brake control failure.
There are only a couple of things to look at. Check the ABS fuse in the under hood fuse box. If they are OK, take the car to your local Auto Zone or Advanced Auto store and get the codes pulled, they will do it at no charge. Write the codes down and reply.
We will go from there.
Good luck,
Regards,

Posted on Mar 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

The ABS lights and other non-ECU issues cannot be read at an autozone. The most economical solution is to take it to a GM dealer (I'd suggest pontiac or buick as they both used the same chassis as the olds-intrigue). The dealer can tell you what the faults with the ABS system are. Or you can get a $2500 "Tech 2" from GM and read the codes yourself. Most likely this is a blown relay or bad sensor or if you are lucky, just a bad connection on one of the sensors.

Posted on Jun 06, 2009

4 Suggested Answers

  • 1608 Answers

SOURCE: ABS, Service Engine Light

This is normal for your anti-lock brakes to quit when the abs light is on.What you will need to do is retrieve the codes and then you can find out what part of the abs system is giving you the problem.This will also cause the check engine light to come on.You can post back and I can help you with the code or codes that are in the brake control module.Hope this helps.

Posted on Dec 14, 2009

  • 137 Answers

SOURCE: olds intrigue warning lights on...

It is a sign that you either have a bad wheel bearing or 1 off your speed censors on 1 of the tires is bad, I just had this problem with my olds alero, but it was a wheel bearing that needed replaced.

Posted on Jan 24, 2010

csmock132
  • 4669 Answers

SOURCE: warning light on are trac off, anti-lock, brakes, service engine

You need to have the abs system scanned for codes. You likely have a bad wheel speed sensor on one of wheels.

Posted on Apr 21, 2010

  • 466 Answers

SOURCE: My Service Vehicle Soon, Trac

Usually it means you have a bad wheel bearing, it has a speed sensor built into it. You will have to have it scanned to pinpoint the problem.

Posted on Jan 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had to brake hard , now the brake and anti-lock lights won't go out


You may be able to turn the light off by using a scanner.
sometimes the light comes on just because you use the system
it may also go off after 20 or 50 starts
You may also have a damaged part keeping the light on.

Jun 28, 2012 | 2002 Oldsmobile Intrigue

1 Answer

The Service Vehicle light and anti-lock brake and Traction Cntrl light comes on after I drive the car for about two mile. I like to know why? I took to the shop and they said the brakes were fine. But the...


If the the abs module fails you still have breaks BUT if you need to apply the breaks to the floor the abs will not work which could allow you to go into a slide because of loss of traction. the abs system pumps the breaks to prevent your tires from locking up

Sep 15, 2011 | 2000 Oldsmobile Intrigue

1 Answer

My Service Vehicle Soon, Trac Off, and Anti-Lock lights all came on at once in my 2000 Oldsmobile Intrigue, what does this mean?


Usually it means you have a bad wheel bearing, it has a speed sensor built into it. You will have to have it scanned to pinpoint the problem.

Jan 21, 2011 | 2000 Oldsmobile Intrigue

2 Answers

Warning light on are trac off, anti-lock, brakes, service engine


You need to have the abs system scanned for codes. You likely have a bad wheel speed sensor on one of wheels.

Apr 21, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Olds intrigue warning lights on...


It is a sign that you either have a bad wheel bearing or 1 off your speed censors on 1 of the tires is bad, I just had this problem with my olds alero, but it was a wheel bearing that needed replaced.

Jan 24, 2010 | 2001 Oldsmobile Intrigue

1 Answer

ABS, Service Engine Light


This is normal for your anti-lock brakes to quit when the abs light is on.What you will need to do is retrieve the codes and then you can find out what part of the abs system is giving you the problem.This will also cause the check engine light to come on.You can post back and I can help you with the code or codes that are in the brake control module.Hope this helps.

Dec 14, 2009 | 2002 Oldsmobile Intrigue

1 Answer

THe dash lights come on without


no it is not safe, have tis tested by the dealer ASAP

Oct 14, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2000 olds intrigue


sounds like the ABS sensor has gone bad ...have it checked.

Nov 08, 2008 | 1998 Oldsmobile Intrigue

2 Answers

Dash Lights on


sounds like body control module

Jun 13, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

957 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...