- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Bring your car down to autozone store or an auto part store that will diagnose engine lights or service lights for free.
It could be something else that needs looked.
Normally. The oil change shops reset the service light for you.
Hope it helps
Hi. The oil service light in red indicates that the vehicle is over due for a vehicle service..OIL SERVICE.. If you don't have it done, it could all go wrong. Have the light reset after Service and then it will monitor for your next service.bye for now.
A service engine light means it's time for an oil change. That light needs reset after the oil is changed. The computer senses the miles drove automatically and says "change my oil, it's been 3,000 miles" A CHECK engine light means it has to get a scan done. Change the oil, it will be fine. It is suppose to do that. Let me know if this helps you.
meaning you need to change oil and filter in your car .. or if you have done it recently you need to read your manuel in the glove box and see how to reset this service engine soon light.. Jerry holler if you need more
The service engine light DOES NOT mean change your oil. The change oil or maintence required light means change oil. The service engine light is the same as a check engine light and means that there is something (not always really bad) is going on with your motor and need someone that has a code reader to let you know what the code is. Yes that code is a camshaft position sensor code. It is located on the passenger side of the engine in the "valley" between the two cyclinder heads. Its not too hard as long as you have some tools and some skills. Its easiest to remove the serpentine belt and remove the bolts for the power steering pump. That way you can move the pump a little to gain better access to remove the cam sensor. Just replaced one yesterday on a 99 century. Hope that helps!