- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Just because the Blower works doesn't mean you will get air delivery. If the Blower is working but the Blower FAN is not spinning you will get no air delivery. Check out this video to learn more about the blower unit. https://www.youtube.com/watch?v=VpYX663B7Mc
Hey man if the blower is working and air is coming from your other vents i have a few ideas.First i would start by checking your vent selection switch something may be stuck where the dash vents open. If the selector is fine you should try checking the ducting behind the dash it could have come apart or simply be cloged where it routes air to your dash. hope that is helpfull.
the blower motor is under the hood on the pass side. u have to remove the wiper and radiator bottles and also the head light. than take out the 7 bolts that hold the blower motor in than u have to remove the squirel cage before the motor will come out. or it could be the Blower Motor Resistor.
Im having a similar problem, sometimes my blower works other days it wont will when it does work no hot air comes out, blower controls change but no hot air, i replaced the thermostat and now my blowers are not working!
you may have had something fall down into the defrost vent and it has worked its way down and is blocking the air flow thats trying to come out the vents,near the blower motor.also does it sound like the blower motor is spinning on high speed or at a lower speed,you could have a slow turning blower motor.
If the blower motor is capable of working on all the speeds but you only get wisp of air out of the vents then the fan side of the evaporator core for the a/c may be coated with crud and debris which is restricting most of the air that the blower is moving. Usually this problem comes on fairly slowly until one day it is realized that hardly any air is coming out of any of the vents even with the blower on high speed. The blower may even sound like it is working harder than it should to create this little bit of airflow. The fix for this is to remove the blower motor and look into the plastic air plenum with a mirror or flexible borescope and check the a/c evaporator for a thin coating of gray crud. If it's present then I use compressed air and a long blow nozzle [bent to get close to the core] and blow the crud loose. You may not get it all but usually you can blow out enough of it to get back 90% of your airflow. If however your blower doesn't work on every speed then you may have other electrical issues that are preventing the blower from reaching full speed.