Question about 2006 Dodge Ram 2500
The bulb should be a 9004 bulb it is put in from the back side .you have to get it from underneath remove lock counter clockwise pull out bulb than unplug connector .do not touch the new bulbs lens wiyh your finger for the oil from your skin will cut the life short on the new bulb.
Posted on Mar 09, 2009
Don't touch the bulb with your bare hands as the oils will make it burn out. Just follow the directions below and you should be set to go. Good luck
Step1 Engage the parking break and remove the keys from the ignition before attempting any repairs. Make sure you've turned the headlight switch to the off position.
Step2 Open the hood by first pulling the interior hood release lever located below the steering wheel under the instrument panel. Then, walk around to the front of the pickup and push up on the safety catch located in the opening beneath the center of the grill. Lift the hood and secure it.
Step3 Unscrew the expanding fastener from the headlight welt, if equipped. Use a screwdriver to remove the three screws that hold it in place. However, not all Dodge Rams of this generation have this feature.
Step4 Remove the first two bolts from the headlight assembly using a socket wrench. These two bolts will be on the inside near the grille.
Step5 Remove the third bolt located on the outside bottom of the headlight assembly near the fender. You may find it easier to access this bolt from the fender well where you'll find an access hole after removing the fender plug. Use a socket wrench with a ratchet extender for easier removal.
Step6 Pull the headlight assembly away from the front of the pickup, giving special force to the fender side. Be careful not to scratch the paint or jostle the assembly too much. You don't want to have to readjust your headlight aim when you're done.
Step7 Disconnect the electrical connector by giving it a quarter-turn and pulling it straight out from the base of the bulb housing. This should remove it completely from the housing, so you can access the bulb.
Step8 Twist the collar on the headlight bulb a quarter-turn to remove it from the bulb base.
Step9 Install the new bulb into the bulb assembly, reconnect the electrical connector and place it back into the headlight housing. Replace the headlight assembly in reverse order of removal. Make sure all bolts are secure before closing the hood.
Step10 Turn on your Dodge Ram and make sure the headlights are working.
Posted on Mar 09, 2009
Tips for a great answer:
Jun 07, 2012 | 2004 Dodge Ram 3500 Truck
Jan 01, 2011 | 2001 Dodge Ram 2500 Truck
Nov 11, 2010 | 2006 Dodge Ram 2500
Mar 04, 2010 | 2007 Dodge Ram 2500 Mega Cab Laramie
Nov 13, 2009 | 2006 Dodge Ram 2500
Oct 24, 2009 | 2006 Dodge Ram
Jul 16, 2009 | 2006 Dodge Ram 2500
Jan 17, 2009 | 2001 Dodge Ram 2500 Truck
Sep 17, 2015 | 2006 Dodge Ram 2500
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: