Question about 1996 Mitsubishi Eclipse

1 Answer

Vibration/chatter when braking 1996 Eagle Talon AWD occurs when braking vehicle. Removed 50 AMP ABS fuse which disabled ABS, ABS light is ON at the panel, car still brakes good without vibration/chatter. Any ideas? Can car be driven with ABS disabled?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Yes you can but you won't have ABS. Replace sensor and the axle. First try cleanin brake, sensors

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The advance trac and awd are not working correctly At start up my 2005 mercury mountaineer has the abs light on , after driving about 50 yards the awd lock light blinks several times then goes to awd...


You current issue is no different than any other
vehicle problem you have had since 1996 when
the OBD2 Systems came into being

You have a MIL Lamp on or check light as some people
call it

You should have checked fore codes immediately within a day
or so to at least know the codes & then googled them to get
some idea of the issues

You know that you have an ABS Braking System issue based on
your owners manual & your abiltiy to recognize Advance Trac etc

Have to have a shop diagnose that system with professional tools

With an AWD issue possible I wouldn't even use it until fixed

The trac control is ussually a bad wheel speed sensor or related
issue

Jan 21, 2013 | 2005 Mercury Mountaineer AWD

1 Answer

Where is the brake light switch on a 96 eagle talon


It is above the brake pedal under the dash. See picture of typical switch and pedal layout below. #4 is the brake switch.8_23_2012_8_15_39_pm.gif

Aug 23, 2012 | 1996 Eagle Talon

1 Answer

Think i need to bleed abs system on ford expoler.


Sounds like the abs master cylinder area is in need of replacement if the abs fuse is removed and stops better.

Chattering can occur in an abs system when the system senses wheel lockup on that wheel and attempts to anti lock that wheel.

Could also be a wheel speed sensor not working, properly.

Hope this helps.

Jul 11, 2010 | 1997 Honda CR-V

1 Answer

Brake peddle is chattering 2003 ion and would like to pull the anti lock brake fuse (if safe ) until i can afford the repair. I would like to know witch fuse to pull?ABS is on and traction control


If brake pedal is chattering or pulsating it is most likely because you need either front or rear rotors, or both. They are rusted or out of round. If there is something wrong with either your abs or traction control,the abs or traction control light will come on & stay on. As soon as these lights come on, it automatically disables abs or traction control. If you would like to take out fuse that disables abs or traction control circuits, it will leave the lights on.You just wont have their functions. If by some strange condition your chattering goes away, then there is indeed something wrong with your abs or traction control.Fuses are labeled abs or traction either under hood or in your fuse panel in car.

Jun 13, 2010 | 2003 Saturn ION

1 Answer

Starter location on a 1996 eagle talon tsi awd


Should be on the front top area of the transmission where it connects to the motor. Should be easy to reach but you probably overlooked it because that area gets very dirty. 

Mar 16, 2010 | 1996 Eagle Talon

1 Answer

Will a 91 fwd turbo talon flywhell work with a 95 tsi awd talon trans


no the configuration is much different to the bolt pattern and they are also balance differently as well. You can not mis match these or improvise there fit what so ever or internal engine damage will occur

Jan 24, 2010 | 1995 Eagle Talon

2 Answers

I own a pristine '91 eagle talon tsi awd 5


check buscher racing.com or call them they know it all when it comes to talons and dsm's

Oct 29, 2009 | 1991 Eagle Talon

3 Answers

What is the recommended tire inflation on 1996 eagle talon TSI?


32 psi is a safe bet when i cant find the sticker. i usually put just a little more in for beter gas milage dont go over board thought or the center of the tire will wear more quickly than the rest of the tred.

Jun 07, 2009 | 1996 Eagle Talon

1 Answer

I have a battery draw problem in my 96 eagle talon.It's not the alternator.I've got it narrowed down to 2 fuse's the ignition and engine fuse. when I pull both fuse's I loose the draw. one or the other I...


If you still get current drawing when car is turned off, you will have to start pulling electrical connectors and checking for draw. If no change, connect, and go to next connector, repeating until the draw stops, this is the bad component.
I would start with any aftermarket electrical components. Alarm's, radio's, etc. Then I would disconnect and check for draw on any component that get's power when car is off. Horn, light's, brake light switch (usually located towards top of brake pedal), radio, cigarette lighter, etc...Disconnect each component separately and check for current draw.

May 18, 2009 | 1996 Eagle Talon

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...