Question about 1999 Chrysler LHS

2 Answers

Where are the spark plugs located on the 3.5 liter chrysler lhs?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,039 Answers

You have to remove the planium air intake and remove the ignition coil and plug are under it fairly a big job if our not use to it you have to remove lots of part be carefull please rate this a fixya our post was answer good luck pierre

Posted on Mar 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Underneath the coil packs, in the cylinder head.

Posted on Mar 08, 2009

3 Suggested Answers

  • 4 Answers

SOURCE: chrysler LHS won't start!!

the starter is on the right side of the motor down below the the air intake bolted to the transmission three bolts and it comes off

Posted on Jun 22, 2009

1fastbob
  • 301 Answers

SOURCE: oil in 1 1997 chrysler lhs spark plug tube

although I am not familiar with this particular engine my son's Mazda Miata had oil in the plug holes and it only required a new valve cover gasket to fix it.

Posted on Oct 18, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 Chrysler Pacifica stuck in second gear will not


Not sure of your mileag but I had a LHS same engine, and when i had a spark plug go bad the computer limited the number of cylinders from firing. Engine would not allow full power so limits shifting.
did tune up replaced all spark plugs.
happened on LHS on 60,000 miles.

Sep 30, 2016 | 2006 Chrysler Pacifica

1 Answer

How do i change the spark plug seals on a 1996 chrysler lhs


Using a spark plug socket and a long extension, about 12", remove the 1st spark plug. Once the plug is loose, it can be lifted out.


----------------------------obd2express.co.uk
http://www.obd2express.co.uk/wholesale/vcm-metal-box-ids-jlr-new-vcm-release.html

Nov 26, 2012 | 1996 Chrysler LHS

1 Answer

1997 chysler LHs timing belt.. #1 bank runing to rich.tooth off and 1-3 cylinders off which side is # one bank


Check, for 1997 Chrysler LHS 3.5 liter SOHC V-6 VIN "F"... bank #1 is refer at cylinder #1

10_1_2011_2_55_06_pm.gif

Hope this helps.

Oct 01, 2011 | 1997 Chrysler LHS

1 Answer

What is spark plug gap setting on 1996 chrysler lhs


On a 3.5 Liter it is .035. I hope this helps and good luck.

Feb 23, 2011 | 1996 Chrysler LHS

1 Answer

1997 chrysler lhs turns over but no spark. already changed Cam pos. Sensor and Coil block


Try the crank sensor this is the sensor most likely to cause this not the cam sensor. To get to the crank sensor you will have to jack up the passager side of the car and the sensor is located on the transmission bell housing about 3/4 of the way up on the trans were it connects to the engine.(all on the passager side of the trans) It has a 3 wire plug and one 10mm bolt that holds it in. Hope this helps

Mar 06, 2010 | 1996 Chrysler Concorde

1 Answer

Oil in 1 1997 chrysler lhs spark plug tube


although I am not familiar with this particular engine my son's Mazda Miata had oil in the plug holes and it only required a new valve cover gasket to fix it.

Oct 18, 2009 | 1997 Chrysler LHS

2 Answers

In a 94' Chrysler LHS what is the firing order? Took the plug wires off the housing unit.


1994 Chrysler LHS
3.5 liter SOHC V-6 VIN "F"56539136.gifI HOPE THIS IS WHAT YOU NEED. THANKS FOR USING FIX-YA. PLEASE KEEP ME POSTED. FEEL FREE TO COMMENT ON THE ASSISTANCE

Sep 06, 2009 | 1994 Chrysler LHS

1 Answer

Location of oil drain plug


Bottom passenger side of oil pan. On the side of the pan. It is a metric bolt and the pan is aluminum, be careful not to strip plug when threading it back in.

Jun 01, 2009 | 1999 Chrysler LHS

1 Answer

Chrysler LHS won't start!!


the starter is on the right side of the motor down below the the air intake bolted to the transmission three bolts and it comes off

May 31, 2009 | 1999 Chrysler LHS

1 Answer

Chrysler LHS Starter


The starter is located beneith the engine, near the transaxle and it is attatched to the engine by 3 bolts. You need to disconnect the battery, raise the car to get at it. The 3.3 and 3.5 engines take different starters. Rick

Mar 15, 2009 | 1995 Chrysler LHS

Not finding what you are looking for?
1999 Chrysler LHS Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...