Question about 2004 Saturn VUE

1 Answer

Vibration when stoping in brake pedel

When I brake, and get down to about 3miles an hour I get a weired vibration in the brake pedel, car will stop with no probelm but you get a vibration with an audible sound, any Ideas?
Thank You

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Hi. there are two things that can cause this. One is bad rotors that cause uneven brake ware. this can be corrected by requesting the techs to turn the rotors during the brake replacement session. secondly, if you have had this done previously, they may be worn to a point that the turning process has reach a point that it is ineffective and you will need to replace the entire front rotors.

Posted on Mar 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

Comming to a stop light is fine untill your almost stoped then the pedel starts to pausate and the truck stops this only happens at low rpm

Hey The pulsing is you ABS brake system working it only pulses when any one of the wheels try's to skid so I would say you are coming to a very fast stop and need to slow down sooner and come to a gentle more slower stop

Nov 01, 2015 | Cars & Trucks

1 Answer

Vibration in brakes when stoping,had rotor turned and then replace problem comes back in just a few miles less than 100 .If you brake hard it seems to help for a stop or two.

One of the calipers may need to be changed. t may not be releasing completely and causing the brakes to ride on the rotors continent which would eventually rub grooves in the rotors. Also the tire may need to be speed balanced. When the fixed the brakes it may have taken care of some type of vibration but the tire could be the real culprit.

Apr 19, 2011 | 2006 GMC Sierra 1500 2WD

1 Answer

My stop lights wont go off. Stay on all the tima.

There is a button above your brake pedel that probably isn't being pushed in all the way by the brake pedel to shut them off. Try pulling up on the brake pedel and have someone watch to see if they go off when you do that. If so the button for the brake pedel needs to be adjusted so it shut them off when the pedel is not pushed.

Nov 13, 2010 | 1997 Honda Accord

1 Answer

Cruise control stopped working

Check the switch, located on the brake pedel the stop light switch and the cruise control switch are on the brake pedel towards firewall. The cruise control switch is plastic.

Mar 25, 2010 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Steering wheel shakes and brakes vibrate badly when stoping

Sounds like the rotors are warped,Take to a brake shop and have them checked or replaced.

May 22, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Vibration when stoping in brake pedel

probably not mechanical. i'd check into the anti-lock sensor.

Apr 25, 2009 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Saturn VUE Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides