Question about 2004 Jeep Grand Cherokee

1 Answer

How do i change rotors on 2004 jeep - 2004 Jeep Grand Cherokee

Posted by on

  • mdbaysinger May 12, 2009

    I also have a 2004 Jeep and need to know how to change the rotors. Mine is a Grand Cherokee special edition, 4WD, 6cyl. I don't know what "hubless" means though.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Depending if it is hubless, is it 2wd or 4wd, i would need as much info as possible

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep parking brake


You will have to remove the caliper and the rotor to replace the shoes. The parking brake shoes are under the rotor. Not a bad job to do

Jul 22, 2014 | 2004 Jeep Liberty

2 Answers

My 2004 jeep liberty shake when i put on brake


most likly warped rotors, they need to machined or replaced, and new brake pads as well

Nov 08, 2011 | 2004 Jeep Liberty

1 Answer

How often do I have to change the rotors?


Brake rotors are only changed/replaced when they are severly warped and can't be machined true again without making them to thin, the min. thickness is cast on the rotor edge, there is no regualar replacement mileage like changing the oil

May 17, 2010 | 2008 Jeep Compass

1 Answer

2004 jeep liberty limited edition abs warning light stays on. Will go on when started then off momentarily then back on. Just has rear speed sensor. Have changed speed sensor


Wait until the Jeep cool down take it to a car wash or host down the wheels.

MAKE SURE the rotors are cool otherwise you will warp them.

Let them air dry.

TOP OFF the brake fluid with DOT 3 or DOT 4 (check the label on the cap)

Use CRC Electronic parts clear to clean each ABS sensors contacts and the body of the unit.

Make sure the connector is tight after the cleaning.

Make sure the ABS sensor is free from dirt.



Please rate my answer if it's useful to you.

Cheers.

MUSTGO.

Dec 12, 2009 | 2004 Jeep Liberty

1 Answer

The rear driver side brake is making a grinding noise when i turn or come to a slow stop. i changed the caliper rotor and pads and it is still grinding it looks like the bracket on the caliper is rubbing...


You'll need to compare the two sides to find out what is broken, bent, or mis-assembled. You might also want to remove the two rotors and swap them to see if the problem moves from one side to the other which would indicate that the replacement rotor was not the correct one or is out of spec.

Sep 28, 2009 | 2004 Jeep Grand Cherokee

1 Answer

How do i take a rear rotor off 2004 jeep cherokee


Remove the caliper slide bolts and take the caliper loose and hang caliper with a wire to something. Don't let the weight of the caliper to be supported by the brake hose.

Next, remove and discard the O-ring securing the rotor to the axle studs, and remove the rotor. Hope this helped and good luck.

Jul 19, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Rotor removal for the driver side


you have to remove the caliper adapter, remove the brake caliper then the adapter is bolted to the back side of the knuckle

Jan 20, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...