The car don't move on the road.
SOURCE: how to reset the break
I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....
Turn the ignition key to position 2, but do NOT start the car. Wait for
about 45 seconds and the brake warning message will be reset.
SOURCE: Trans Failsafe Prog came up and now won't start 2000 740 IL
change the battery, if u jump it, it will not start its a big engine and needs a new battery-u will hear click click and no start right
SOURCE: i also have a trans.failsafe prog.indicator light on my 2000 bmw
You have an alternator or battery concerne,low voltage caused all the other problems,Start with a battery,then have alternator tested.The failsafes are designed to keep from burning up solenoids and other electronic components.
SOURCE: bmw 2000 7 series trans. failsafe prog.
pretty quick. but be sure it the alternator. You can test it by starting the car then unplugging the battery. If it cuts off when you unplug it it's the alternator if it keeps running it's not the problem
SOURCE: 1996 BMW 750IL Engine failsafe prog. no throttle
When that happened to me it was a blown fuse
436 views
Usually answered in minutes!
×