Question about 2001 Nissan Quest

1 Answer

Broken door handle - 2001 Nissan Quest SE

I see that you had information on fixing a 2001 Nissan Quest door handle that you were going to email to someone else. I'm wondering if you would be able to do the same for me? Is this something that a female who doesn't work on cars normally would be able to handle? Unfortunately, with the below 0 weather we have had the doors had been freezing frequently and I (am 5'1, 110 lbs and not that strong)somehow broke it off while trying to open it. My husband is quite frustrated and I'm not willing to pay hundreds of dollars for this. I would appreciate any help you may have to offer. Thank you.

Posted by on

  • Anonymous Mar 09, 2009

    I have the same problem, the drivers front and both passenger sliding doors froze up during an ice storm, and broke when trying to open. We are mechanically challenged! The price of door handles for the three was almost 600 dollars, just for the parts alone. With a grandbaby to put in the back in the car seat at times, and my husband a struggling student/computer geek who doesn't know a screwdriver from a hammer, we are in TROUBLE!

  • T. Hartman Mar 09, 2009

    me three

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 4,369 Answers

First you van order parts at discount from tascafordparts.com.
quest & mecrury villager are the same vehicle made at the same assembly plant. good luck to all. If you were in detroit area, I wold help you.

Trim Panel —Sliding Door Removal

  1. Remove the sliding door trim panel finish panel.
Broken door handle - 2001 Nissan Quest SE - 532ac84.gif 2. Remove the sliding door trim panel 2965fbe.gif Latch Remote Control —Sliding Door Removal
  1. Remove the rear sliding door trim panel. For additional information, refer to Section 501-05 .
  1. Position the watershield aside.
  1. If equipped, disconnect the sliding door power door lock actuator electriBroken door handle - 2001 Nissan Quest SE - f373e91.gifor.
f373e91.gif
  1. NOTE: Mark the position of the sliding door rear latch cable adjusting bracket before removing the bolt.
  2. Disconnect the sliding door rear latch cable.
  3. Remove the bolt.
  4. Remove the sliding door rear latch cable adjusting bracket from the latch remote control.
  5. Disconnect the sliBroken door handle - 2001 Nissan Quest SE - b8f2f32.gifear latch cable from the latch remote control.
b8f2f32.gif
  1. Remove the 4 sliding door front latch bolts.
NOTE: If necessary, transfer parts to the new sliding door latch remote control.
Remove the sliding door latch remote control.
  1. Remove the sliding door latch remote control.
cb5ee71.gif
Handle —Exterior, Sliding Door Removal
  1. Remove the sliding door latch remote control. For additional information, refer to Latch Remote Control—Sliding Door .
  1. Remove the sliding doorBroken door handle - 2001 Nissan Quest SE - 0c820f3.gifandle.
    1. Remove the nuts.
    1. Remove the sliding door exterior handle.
0c820f3.gif

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear sliding door interior panel on 2001 Nissan Quest?


Mostly clips, screws hold the handle on and bezel around it has clips that can carefully be pried off.. A door panel tool should be used to enage and pry panel clips off

Aug 22, 2014 | 2001 Nissan Quest

1 Answer

Need to replace balljoint and driveshaft in a 2001 Nissan Quest Se is there a online manual or video that can help me through this and how long should this job take


YOU CAN GO TO YOUR LOCAL AUTO ZONE OR ADVANCE AUTO PARTS STORE AND BUY A REPAIR MANUAL CHEAPER.YOU GO ON LINE YOU GOT TO PAY FOR SHIPPING AND HANDLING ALSO SALES TAX IN SOME STATES.

Jun 01, 2010 | 2001 Nissan Quest

1 Answer

I have also broke off my 2001 Nissan Quest sliding door handle on the driver side. Also the sliding door cannot be opened from interior... Any help is appreciated... Thanks


the child lock rod may have been extended...
open the driver side door, and with a skinny finger, push that child lock rod back in towards the rear of the sliding door
use the passenger side as reference
once you pushed it in, you can now open it from the inside handle

Oct 06, 2009 | 2001 Nissan Quest

2 Answers

Im looking for a sliding door handle for a 2000 nissan quest van.


ebay has them all the time also, go here for help on Quests http://autos.groups.yahoo.com/group/villagerquest/

Jun 01, 2009 | 2000 Nissan Quest

1 Answer

Replacing The wiper arm on a 2001 Nissan Quest


Removing and replacing the wiper arm is a very technical and delicate affair. If you don't handle with care you may get your windscreen broken. I advice you let an expert do this for you.

Good luck.

Apr 12, 2009 | 2001 Nissan Quest

1 Answer

I have a Broken Exterior Sliding Door handle


tascafordparts.com same car as vilager

Jan 16, 2009 | 2001 Nissan Quest

1 Answer

2001 Nissan Quest - Broken Exterior Sliding Door Handle


you can do this. you have to remove inside trim panel for access. if you still need to do, I will send you repair steps. let me know

Oct 16, 2008 | 2001 Nissan Quest

Not finding what you are looking for?
2001 Nissan Quest Logo

Related Topics:

4,351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...