Question about 2009 Lexus RX 350
The 3rd brake light under the spolier was hit by a ball and it's plastic frame is broken. Its hanging from the spolier by its wire. How do I replace it? Can it be replaced without taking the whole spolier off?
PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
Posted on Dec 18, 2008
it is usually given to the owner and in the glove compartment or in the kit area for the jack if you still can not find it Lexus wheel locks have a unique shank on the base and can only be replaced at the dealer so ask the dealer
Posted on Aug 27, 2009
Sorry, i cant really provide a solution without more details..
But i would say check the transmission fluid (assuming its an auto, since you said when it shifts)
If your transmission fluid is low, add some, then "Cycle" the fluid.
Start in your cars lowest gear (L or 1?) and keep it there for like 15 seconds. Then move up to gear 2, then (3?) or "D", then "N", then "R" then "P" with 15 seconds in between. The whole time your doing this, your holding the brake, and not moving. Your going from the lowest gear you can pick, to park. if your car has the manual mode and doest have "1 / L" or "2", put it in manual mode, keep it in first gear, tap to shift to second, and if it lets you go any higher, go to third, fourth, etc. with 15 seconds in between..
Do this anyways and see if it helps haha.. Good Luck!
Posted on Feb 06, 2011
Tips for a great answer:
Nov 09, 2016 | Lexus RX 350 Cars & Trucks
Jan 30, 2016 | 2010 Lexus RX 350
Apr 27, 2014 | 2008 Lexus Rx 350
May 28, 2010 | 2007 Lexus RX 350 FWD
Dec 30, 2009 | 2008 Lexus Rx 350
May 29, 2009 | 1998 Lexus ES 300
Dec 18, 2008 | 2008 Lexus Rx 350
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: