Question about 1998 Honda Civic

2 Answers

What tools do I need to remove an inside door panel 98 civic

Posted by on

  • Jeffrey Scarf
    Jeffrey Scarf Mar 19, 2009

    cheers for that really helpful and informative

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

A philips head screwdriver, a shoe lace for catching the clip on the door handle and a bit of patience to do that and you should have no problem. there is a screw behind the handle that opens the door, one in the handle in the middle of the door and three around the speaker once you pull off the cover of the speaker you will see the three holes, on at the top and two bottom right and left as well, once all five are taken out just gently pry the door swab(panel) away from the frame and you should hear some clips releasing but they are nothing to worr about. then lift up the door swab and the trim should come up and away from the door. if you follow this you should not have a problem getting the panel off :)

Posted on Mar 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Try “autozone.com” or your local library for diagrams and step by step instructions.

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 civic sedan rear passenger door wont open inside or outside


This is a common fail on Honda civics, as a small tab breaks off of the door handle assembly inside the door. The door handle assembly needs to be replaced, and the part is about $75 . Often you need to remove the rear lower seat cushion to get the door panel off.

Sep 10, 2013 | Honda Civic Cars & Trucks

1 Answer

HOW TO REMOVE EXTERIOR DOOR HANDLE 98 CHEV CHEYENNE


You are going to have to remove the inside door cover and get at it from that side---remove the door panel inside--they do sell tool kits especially for this task so not to damage clips etc.

Dec 17, 2012 | 1998 Chevrolet K1500

1 Answer

How do you change the outside door handle on a 98 Honda Accord?


You will need a repair manual. It involves removing the inside
door trim panel, a job in itself, the watershield and so forth
to access the outside door handle and mounting bolts.

Feb 11, 2011 | 1998 Honda Civic

1 Answer

HOW DO I REPLACE DRIVER DOOR INSIDE OPENING HANDLE 98 VW CABRIO


mcdevito75 here, The inside of the door panel has to be removed then linkages removed, you may need special tools, let a shop that does glass, locks change that handle for you.

Jun 17, 2010 | 1998 Volkswagen Cabrio

1 Answer

How to install replacement door handles for 98 ford ranger pickup


remove interior door panel(need special tool to pop plastic clips holding panel to door)with panel off remove plastic film,with window up you should be able to see two 10m nuts-bolts to remove-also have to pop lever off that goes down to door latch

Sep 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

How to remove a 1999 civic se left door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 28, 2009 | 1999 Honda Civic

1 Answer

How to remove door panel of passenger side on honda civic 2008, just to repair a small dent from inside


it s easy just look on panel for caps remove with small scerw driver they should just pop out remove all screws there should be 2 near arm rest area and near handle then there are plastic clips just gently pull on panel near clips when panel is loose disconnect wiring for light or power locks window ect. if u have manual window u need tool to remove window handles

Mar 28, 2009 | 2003 Honda Civic

1 Answer

Need to install a passenger side mirror on my 1992 Honda Civic


Remove the door panel, one screw at the inside handle and one at the door pull hole, one plastic screw clip under mirror, use universal window crank removal tool to pop out a wire thin horse shoe shaped clip from the window crank if you loose it you can get another at the auto parts store for 50 cents. Gently pry off door panel, gentley pry off inside mirror cover from the top. Remove three screws to remove outside cover, Install mirror using 8mm head size nuts, reinstall.

Mar 12, 2009 | 1992 Honda Civic

1 Answer

Passenger door won't open from inside on 98 S70


You will need to remove the door panel from the inside and look for any missing links or bent parts that are causing the problem. Use a trim tool to get the panel off. Unscrew the arm rest. Have a magnet on a telescoping wand hand to fish any parts that fell to the bottom of the door out.

Jan 20, 2009 | 1998 Volvo V70

1 Answer

Driver's side window regulator


I just replaced the regulator in my mother's 98 civic ex and didnt need any special tools. I do recommend replacing the glass run channels on either side of the window. I have replaced the regulator twice and it is still having problems as I haven't replaced the run channels. If not replaced very soon I can see myself replacing the regulator...yet again!

Aug 04, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1998 Honda Civic Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...