Question about 2004 Kia Optima

Open Question

Iwant toprogram a kia sportage keyless entry remote but dont know

I need to program a keyless remote i bought but dont know how it is a kia sportage 2002

Posted by on

5 Suggested Answers

SOURCE: nissan murano 2005 sl keyless entry remote programing

Close all vehicle doors, LOCK doors using drivers side switch.

Insert key all the way into the ignition, (do not turn) remove key.

Repeat this step 5 times. (6 total)

Hazards should flash to indicate program mode.

Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.

*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.

Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.

Source

Posted on Aug 06, 2008

emissionwiz
  • 61168 Answers

SOURCE: How do I program my keyless entry? - 2003 Kia Sorento

go to this link for instructions with pictures

http://www.programyourremote.com/classified/DisplayAd.asp?id=1674

Posted on Jun 17, 2009

Molson02536
  • 3854 Answers

SOURCE: programming a keyless entry remote

Key Fob Auto Learn
This procedure will first erase all known key fobs. The procedure will then program a single or multiple key fobs. Method 3 is a series of three 10-minute key cycles, for a total of 30 minutes. This procedure requires that you have a replacement key fob and the vehicle mechanical key.

Important: All previously programmed key fobs will be erased upon completion of the 30-minute programming procedure. The order in which the key fobs are programmed will determine its numbering position within the RCDLR memory. The first key fob programmed will be key fob #1, and the second key fob programmed will be key fob #2. The number stamped on the key fob case is for reference only: #2 can be programmed as #1.
Do not place any known good key fobs in the vicinity of the vehicle when programming. 

The vehicle must be OFF. 
Place the replacement key fob in the console pocket with the buttons facing forward. 
Insert the vehicle key in the driver door lock cylinder located in the driver door handle and cycle the key 5 times within 5 seconds. 

The DIC will display a message: OFF/ACC TO LEARN. 
Press the OFF/ACC portion of the ignition button. 
The DIC will display a message: WAIT 10 MINUTES, then it will count down from 10 to 0, one minute at a time. 
When the counter reaches 0, DIC will display OFF/ACC TO LEARN. 
Repeat steps 5-7 two more times, for a total of 30 minutes. 
The DIC will display a message: OFF/ACC TO LEARN. 
Press the OFF/ACC portion of the ignition button. 
A beep will occur and the DIC will display: READY FOR FOB 1. At this time all previously known key fobs have been erased. When fob 1 is programmed a beep will be heard and the DIC will display a message: READY FOR FOB 2. 
Additional key fobs can be programmed by taking fob 1 out of the pocket and inserting fob 2. If desired, up to 4 fobs can be programmed. Once 4 fobs have been learned, the DIC will display a message: MAX FOBS LEARNED, and automatically exit the program mode. 
If learning less than 4 key fobs, press the OFF/ACC portion of the ignition button to exit the program mode. 
Operate the active portion of each key fob in order to finalize the programming sequence and verify correct system operation. 

Good luck and hope this help's keep me posted, there are 3 other methods and the 5th method is a tech 2 scan tool that the dealer uses but this should work on your year of cadillac. 

Posted on Jul 01, 2009

  • 10 Answers

SOURCE: 2004 ram remote keyless entry

The instructions are in the owner manual on how to manually program it.

Posted on Jul 07, 2009

  • 91 Answers

SOURCE: program keyless entry for mazda rx8

its a dealership and computer job by them, you cant do it yourself

Posted on Jul 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Disable the immoboliser so my car will start 99 Kia sportage


http://www.kia-forums.com/1g-2001-2005-rio/48817-emergency-deactivation-immobiliser.html Immobiliser
he following are instructions for programming the Sportage Remote Keyless Entry System Transmitter. Up to 4 transmitters can be programmed to each Kia Remote Keyless Entry System.
Instructions: 1. Open driver's door. 2. Turn ignition to on position 3. Locate the 2-wire black programming button branching off the RKE wire harness near the control module located behind the front left side of the center console. 4. Press and hold the programming button 10-15 seconds, horn will sound 3 times. Release button. 5. Press lock button on transmitter, horn will beep 1 time. Repeat this step for additional transmitters. 6. Turn ignition off, test transmitter for proper operation.
Read more: http://www.justanswer.com/kia/4e453-97-kia-sportage-keyless-entry-immobiliser-the-ride-code.html#ixzz3bujrTnDq


Mar 02, 2015 | 1999 Kia Sportage

1 Answer

How to program keyless entry remote for buick lacrosse?


I own a 2007 Buick Lacrosse, but I imported it to Paraguay, South America. Now I bought a new Engine Start Keyless Entry Remote from Amazon, but here we do not have any GM dealer to program the unit.
I really need help to program the keyless remote control, I will appreciate very much your help.

Jan 02, 2012 | 2005 Buick LaCrosse

1 Answer

Have verified that my newly purchased 03 kia sorento has remote keyless entry, but professional locksmith cannot get new remote to program. Remote is Bontec T009, pretty sure it is correct one. Could it be...


Yes the 03 and up sorento has a keyless remote entry, You do not need to reset the ECU, you however need to reprogram the remote trasmitter to your car so they communicate, otherwise it will never work if you do not program it. You will need to take this to a kia dealership with the remote transmitter. They may or may not charge you for a fee. However I did had a remote, and it became damaged when my kid drop it in the fish tank. I was able to get it done at the dealship, 35 for the remote, and 50 for service fee. I did however found some link referal to manually do it yourself, Please check this forum out http://www.kia-forums.com/2003-2010-sorento-forum/34549-remote-keyless-entry.html. For me, I did not bother, because I did not want to take the chance to mess up something else.

Jan 28, 2011 | 2003 Kia Sorento

3 Answers

How do i reset my new remote control for my alarm immobiliser for my 1997 kia sportage


YOU DONT ,you have to take it to a hyudai/kia dealer and they will recode the KEYS/REMOTES to the car.takes about 1/2 hour max.take all keys/remotes with you.

Jan 11, 2011 | 1998 Kia Sportage

1 Answer

How to program a remote on 2006 kia sportage


you have to take it to the dealer cant be done at home

Apr 01, 2010 | 2006 Kia Sportage

1 Answer

Can't program Second remote to my Ford Explorer 99


reading your post you mention to "open and close switch"..not sure what refering to...these are the instructions from your vehicles service manual...good luck!

Programming NOTE: All keyless entry remote transmitters (15K601) are programmable and must be set at the same time.
NOTE: To program (or reprogram) the keyless entry remote transmitters into the RAP module, perform the following steps:
  1. Make sure that the anti-theft system is not armed or triggered.
  1. Turn the ignition switch (11572) from OFF to RUN eight times within ten seconds, ending in RUN. If the RAP module has successfully entered program mode, it will lock and then unlock all doors.
  1. Press any button on a keyless entry remote transmitter, and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been programmed.
  1. If the door locks do not respond for any keyless entry remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Diagnosis and Testing.
  1. Turn the ignition switch to the OFF position, or wait up to 20 seconds after step 2, to exit program mode. If a keyless entry remote transmitter has been programmed (or reprogrammed), the RAP module will lock and unlock all doors one last time to confirm.

Jun 08, 2009 | 1993 Ford Explorer Limited

3 Answers

Keyless entry for 05 Kia Sportage


i have a kia optima my keyless quit working to.I took it back to the dealer and the said it was common on a lot of kia models.They replaced the module for the keyless remote,that seams to have fixed it.

Mar 17, 2009 | 2004 Kia Optima

2 Answers

Key less entry


you have to get a kia keyless remote a mitsubishi won't work

May 29, 2008 | 2001 Kia Optima

Not finding what you are looking for?
2004 Kia Optima Logo

Related Topics:

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...