Question about 1984 Nissan Pickup
2.4 4 cyl Z series motor
hi there, if you can feel the misfire at an idle but not at a higher rpm than the fuel pressure regulator is bad im working on one right now that has mifire code and random misfire codes coming up
Posted on Aug 28, 2008
At the cost of the igniter i recommend checking your pickup coil.( The 2 wire sensor in side of your distributor. The The igniter will not allow the coil to fire with out reference form the pickup coil. Coil has primary and secondary resistances. when the primary coil powers up and then pulses off, this cause a high voltage due to magnetic degeneration. Check the coils primary and secondary resitances along with the air gap in the pickup coil, and also check the resitances on the pickup coil. If i am right your igniter will be okay.Get a good manual for you truck, It will save you money down the road.
Toyota does not have at test proseger for the ingiter.
Also check the wires in between the pickup coil and the igniter.
I hope this helped.
Posted on May 04, 2009
SOURCE: 1987 Nissan Pickup Truck Will not start it will crank. So i Did Tune up With wires spark plugs I Don't know the order of last 2 wires that go in center of dist cap. Please help and will this solve thi
I'll send you 2 pictures, 1 will be your engine. I picture in each post.
Posted on Jun 02, 2009
Testimonial: "thank you"
Tips for a great answer:
Mar 04, 2016 | 1994 Nissan Pickup
Apr 22, 2015 | 1984 Nissan Pickup
Nov 26, 2013 | 1984 Nissan Pickup
Mar 28, 2012 | 1986 Nissan Pickup 4WD 1986
Jan 25, 2011 | 1984 Nissan Pickup
Jan 12, 2011 | 1984 Nissan Pickup
Dec 25, 2010 | 1997 Nissan Pickup
Aug 09, 2010 | 1984 Nissan Pickup
Oct 31, 2009 | 1986 Nissan Pickup 4WD 1986
316 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: