Question about 1991 Chevrolet Camaro

2 Answers

What is the timing set at for a 1991 Camero 305 V8 ?

What degree do I set my engine to for a 1991 Camaro 305 V8 ?

Posted by on

  • Anonymous Apr 27, 2009

    I just set mine today at 0. I had a tuned port earlier and remembered to disconnect the "set timing" wire before timing it. I found a wire near the distributor on this TBI car, coming off the coil I think, and disconnected it. I'd set it at 10 degrees advance earlier today and it started real hard - obviously too much advance. It runs fine at 0. Good luck.

    Duggeroo

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

TUNE PORT IS 6 DEGREES TBI 0 DEGREES

Posted on Sep 24, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try 0 degrees. It should state it on the radiator cover, but mine didn't. I tried 10 advance and it started real hard. I think you need to disconnect the single wire terminal near the distributor/coil that sticks out of your harness wrap before you set timing and reconnect it afterwards. That's what I recall from my TPI car and this TBI car seems to have the same electronics. Good luck.
Duggeroo

Posted on Apr 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I interchange a 1980-1985,305 chevy engine with a 1991 305 chevy?


as it is the basic 305 block the differences may be fuel injection over carburettor which may require sensor attachments but basically the engine should just slot in place.

Feb 05, 2015 | 1991 Chevrolet Camaro

1 Answer

Is there two different kinds of 93 camero


yes theres the z28 and the rs version z28 coming with a 5.7L engine v8 and the rs coming with a 3.4L engine v6

Jan 15, 2011 | 1993 Chevrolet Camaro

1 Answer

How can I tell if my 1990 ck 1500 is 305 or 350 V8 ?


LOOK AT YOUR VIN NUMBER THROUGH WINDSHIELD 8TH NUMBER FROM LEFT TO RIGHT ENGINE CODE OR LOOK ON YOUR VECHICLE REGISTRATION. VIN H 305 ENGINE AND VIN K 350 SOME TIMES 305 OR 350 BE ON THE INTAKE MANIFOLD OR FOUND ENGINE CASE PAD FRONT RIGHT HAND SIDE OF THE CYLINDER BLOCK.

Nov 27, 2010 | 1991 Chevrolet C1500

1 Answer

I need to hook up all the vacuum lines to my 91 rs camaro v8 305 small block but i dont no were they go?


there should be an emissions sticker on the hood or the radiator support to show you where they go,or you can go pick up a repair manual for about $20 with diagrams in it to show where they go,hope this helps

Oct 21, 2009 | 1991 Chevrolet Camaro

1 Answer

My 305 (V8) Carb'd engine likes to diesel when i shut off the car


Hopefully this should be a cheap solution to fix the problem. Your timing is a little off. You need to adjust your distributor. First start your car. Then loosen the bolt on the cap. slowly turn the cap until the engine evens out and it sounds proper. Tighten the bolt on the cap. Turn off the car and everything should be good from there. Hope this helps.

May 10, 2009 | 1986 Chevrolet Camaro

2 Answers

What is the timing set at for my 1991 Camaro V8 305 ? Will someone answer me please ?


A 10 deg BTDC is the initial set and a 0 deg is ECM controlled timing at idle.
I assume you know how to prepare distributor for initial set.
Regards.

Mar 08, 2009 | 1991 Chevrolet Camaro

1 Answer

Will a 4L60e auto. trans. from a 1999 firebird fit my 94 camero z


the problem you will have is the trans for the v6 will have less friction material in it so it will havea very short life in a v8 car.. so no its not the same trans internally but as for the fit if the v6 is a 4.3 yes a direct fit for the v8 ..

Feb 04, 2009 | 1994 Chevrolet Camaro

1 Answer

1991 chev camero convertable 5.0


iwould get a fuel pressure test & injectors

Jun 15, 2008 | 1991 Chevrolet Camaro

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...