Question about 2004 Ford Freestar

3 Answers

I can't find the keyless entry code for my 2004 ford freestar

I can't find the keyless entry code (for the push buttons on the drivers side) for my 2004 ford freestar sport. I don't have the owners card either.

do I have to re-program the little remote thing too?

Posted by on

  • Anonymous Apr 20, 2009

    2004 Freestar remote stopped working - replaced battery and still not working

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The code is on the fuse box under the dash near the hood release. On my van there are two bar codes on a sticker attached to the fuse box. Under the first bar code, on the right side is the 5 digit code (bring your glasses the numbers are really small). After you get this code, just search the internet and there are plenty of forums on programing the keyless remote and also adding your own unique number to the key pad entry.

Good Luck

Posted on Aug 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

It's on a plastic card in your owner manual packet.
I think it's also on the module.
Also, you can go to dealer with 17 Digit VIN and ID and they can call FOrd or retrieve from module with diagnostic tool.

Posted on Mar 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Here's an article that explains where to find the factory set code and how to reprogram your keyless entry for a Ford Freestar. These instructions work for model years 2004 through 2007. Reprogramming Keyless Entry for Ford Freestar without Factory Set Code

Posted on Mar 19, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the 5 digit code on the keyless entry pad on driver's door on 2007 ford freestar? Also - what is the gas that is in the tires with the green cap? Where do I get them filled?


look in the manual or online every manufacture is different. The green cap could mean that they have slime a self sealing liquid. All tires take air and nothing else!

Sep 09, 2010 | 2007 Ford Freestar Limited Minivan

2 Answers

Cant find push button keyless entry code


They haven't put the code on the trunk lid for at least 10 years. On the 500/Montego, it's printed on a sticker on the Smart Junction box. This box is behind the fusebox (under the dash on the driver's side, above your left foot), so the sticker is facing the engine. You can use an inspection mirror to see the sticker, but I was able to get my digital camera behind there and take several pictures, and I was able to see the code.

Aug 05, 2009 | 2006 Ford Five Hundred

1 Answer

Program factory remote keyless entry for 2003 Hyundai XG350


This bulletin supersedes TSB# 02-90-001.
DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:
  • 2001 - 2004 MY Elantra
  • 2001 - 2004 MY Santa Fe
  • 2002 - 2004 MY Sonata
  • 2001 - 2004 MY XG300/350 0390020a.gif
NOTE
  • The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
  • The most current Keyless Adapter Cable Instructions are available in the following shop manuals:
SHOP MANUAL

PAGES

2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
  1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. 0390020b.gif
  2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
    0390020c.gif
  3. Turn the Hi-Scan Pro ON
    and press ENTER
    . NOTE "Release date 29. Sep. 2003" OR LATER
    must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
    0390020d.gif
  4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
    and press ENTER
    . 0390020e.gif
  5. Select vehicle model and press ENTER
    . 0390020f.gif
  6. Select option "TRANSMITTER CODE SAVING"
    and press ENTER
    . 0390020g.gif
  7. Ensure that the key has been removed from the ignition cylinder before proceeding. 0390020h.gif
  8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
    0390020i.gif
  9. Press ESC
    on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
  10. Turn the Hi-Scan Pro OFF
    and disconnect the adapter cable from the multi-purpose connector.

May 22, 2009 | Hyundai Motor 2003 XG350

1 Answer

Would like to rekey my auto-keyless entry and cannot find the code near the instrument panel.


your factory code for keyless entry by number pad? this is found on the module for keyless entry located under dash left side, number on module in BOLD type is the original or factory code

May 18, 2009 | 2004 Ford Expedition

3 Answers

Need keyless entry code for a 04 an 99 ford explorer


On your 99 model the module is located behind the left quarter trim panel,mid-way.You maybe able to see it by removing the speaker cover or the cupholder on top. The module will have a sticker with a 5 digit code.
On the 04 the model is behind the right quarter trim panel toward the front about even with the right rear door stricker.

May 17, 2009 | 1999 Ford Explorer

1 Answer

Location of computor module for keypad entry


the keyless entry module is on the drivers side of the truck up under the dash directly above the emergency brake. The tag should have a 5 digit number in bold, that is your door code.

Mar 23, 2009 | 2004 Ford F150

3 Answers

CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE


Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

Mar 16, 2009 | 2007 Ford Edge SEL Plus

2 Answers

Keyless entry and door locks


Do you have he owners manual? instructions are in there for the keyless entry system. If not go to this link:

http://www.motorcraftservice.com/pubs/content/~WOTEXP/~MUS~LEN/41/96expog1e.pdf

Sep 21, 2008 | 1996 Ford Explorer

3 Answers

Entry code om drivers door


The keyless entry module is located in the rear of the vehicle on the driver's side. You will need to partially remove the left rear panel in the cargo area. You will then see the keyless entry module bolted behind a metal reinforcement bar. There is a sticker on the module that has the 5 digit entry code.

May 26, 2008 | 2001 Mercury Mountaineer

Not finding what you are looking for?
2004 Ford Freestar Logo

1,252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

71525 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...