An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: chrysler mini van'01 wiper blades
Pull them up to standing position for easier to work on. Look on underside for a small tab, you usually push tab, and wiggle & pull blade down & out. New one slides back in same way until it snaps, your done. Do one at a time so you have other for reference, if not sure how it goes back in, it's a little tricky. P.S. Most parts places will install free if you buy them there, just ask.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
These are available at the dealership. There is one way though. You can get a 21" RAIN X wiper and i just cut it down to size. The grooves on a RAIN X will fit up to your rear wiper. As far as replacing it although it looks more difficult at first glance it it every bit as simple as the front wiper blades. It's a simple pop off. You can also just change rubber wiper and leave the actual blade alone. the rear is a mini blade style (this refers to the size of the rubber insert in the blade, not the actual whole blade being small.) You can replace the rubber using an Amcor blade or any "mini" blade. Puchase the biggest one they have, take out the rubber wiper and just cut to size. You can change the rubber many times off of one blade thus saving you a bunch of money.
The van is now about 13-14 years old, chances are that the switch has worn to a point that the finite metal particles are shorting it out causing it to be on all the time. Re and clean the switch contacts, you should be good to go. Please let me know how you make out. Good luck..
If you still have your '08 Cruiser, I just changed mine (I'm also a Mom)...You have to pop off the plastic cap on the base of the wiper where it attaches to the window, then with a small wrench, take off the hex nut. Work the wiper arm off the spindle, then replace like the front wipers...push old wiper hook up, pull thru, and replace blades per instructions in the blade package...Pat