Question about 1999 Jeep Wrangler

1 Answer

Possible brake light fuse blown as brake lights don't work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 110 Answers

Good morning and welcome to fixya
a couple of questions for you to get us started. first is the brake lights the only lights that dont work or are all the rear lights out? second have you checked the brake light switch? you will want to check both places the switch and the fuse. if the fuse is blown then there is a reason now we have to find that reason. usually the brake switch is the reason. i believe this switch is located on the brake pedal arm up inside the dash. you can buy a new one for less then 20 bucks usually of course depends where you buy it. just an easy plug and play swap. i would also check the lightbulbs and connectors at the lights. good luck and let me know what you find

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just installed led tail lights in my 2003 gmc sierra everything works but the brake lights any ideas?


First, verify that the brake lights work correctly with the old lights. If your blinkers work, the brake lights should work as well.
It is possible that your brake lights were not working previously. If they do not work, suspect a blown fuse or a defective brake light switch.

May 11, 2015 | 2003 GMC Sierra

1 Answer

Brake lights don't work on 95 crown victoria


Battery power is applied through 15A fuse 1 in the I/P fuse panel. It passes through the brake on/off switch and is routed through the multi-function switch to the stop lamps. When the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights.

Sep 08, 2012 | 1995 Ford Crown Victoria

1 Answer

Brake lights don't work but 3rd stopping light does


it should be easy, first check all the fuses, if that dont work remove the tail lights and check the wiring it may have broken wires or blown bulbs

Jul 18, 2012 | 2003 Chevrolet Impala

1 Answer

My break lights don't work


You may have a blown fuse. Have you checked your fuses. If not, the fuse you will want to check is in the fuse panel inside the vehicle. Below is a diagram of the fuse layout. The fuse you will want to check is the fuse in the number 16 position. The other possible problem could be the brake light switch located up under the dash on the brake pedal shaft. I hope this helps.

12_11_2011_7_17_14_pm.jpg

Dec 11, 2011 | 2006 Hyundai Elantra

3 Answers

98 town car my brake lights both turn signals work my hazards work, but my running tail lights don't work


Hello,

Inside your instrument fuse panel look for fuse #31 which powers up the light control module and the main light switch, also while there be sure and check fuses 1, 3, 5, 7, and 9 to be sure they're not blown.

Good luck!

Let me know if this helps.

Rodney

Jun 14, 2011 | Lincoln Town Car Cars & Trucks

1 Answer

No brake lights check fuses no blown fuses but the center brake light work


If the center high mount brake light comes on when brake pedal is depressed, and the rear brakes don`t come on, and the fuses are not blown, then I would replace the rear bulbs.

May 02, 2011 | 2009 Nissan Altima

1 Answer

Brake light fuse keeps blowing Noticed our brake ligths were not working...checked the fuses under the dash and they were fine...checked under the hood and found one blown...replaced it and the brake...


Take a look at the wiring to the brake lights. It is quite possible that over the years one of the wires has rubbed against another enough to short out, causing the blown fuses.

Jul 17, 2009 | 1998 Mazda Protege

3 Answers

Back tail light wont work fuse is not blown, my revers light work, and my brake light, but my running brake light isnt


tail light will not work when i turn my lights on in my vauxhall cavaleirbut my fog light works when i tun it on
on my passenger side

Jul 20, 2008 | Mitsubishi Galant Cars & Trucks

Not finding what you are looking for?
1999 Jeep Wrangler Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...