Question about 1998 Dodge Durango

2 Answers

Seized brakes shoes.

Can you help me unseize my shoes on peugeot 307 HDI as I am trying to replace the pads and discs. The old disc and pads are off, but the new ones wont fit on due to the piston being stuck out.

Can you help??

Thanks

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Expert
  • 215 Answers

Buy a C or G clamp from any DIY store or hardware shop and place your old brake pads as it was. Put the clamp on it and press until its limit. Now remove the clamp and old pad, the piston won't come forward. place the new pads and put it on the stud. eventually you have to use the copper grease to slide it on the new disc. Hope helped you anyway

Posted on Sep 05, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 294 Answers

TAKE A BLOCK OF WOOD AND A CLAMP USE THE CLAMP TO COMPRESS THE PISTON

Posted on Mar 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 307 1.9hdi on an 52 plate had warped brake discs so replaced discs n pads but still seems to make a slight thumping sound and ABS LIGHT IS CONSTANTLY ON PLZ HELP


did you use a repair kit when changing your breaks I had this problem went and brought a kit from local Peugeots renewed rubber and pins good for go if the pin is bent it sticks causing the breakes to jam then releases with a knock good luck

Feb 09, 2018 | Peugeot 307 Cars & Trucks

1 Answer

How to program key on peugeot 307 hdi 2001


put key in icnition turn on but don"t start engine,press door lock and hold for a few seconds,then turn off,key fob should now work,if not try again,also make sure you have the correct battery in key fob.

Nov 29, 2014 | 2005 Peugeot 307 HDi

1 Answer

I want a picture of an engine undercover for a peugeot 307 hdi rapier


try ebay adds, or join peugeot public service box and see the diagram

Apr 15, 2013 | Peugeot Cars & Trucks

1 Answer

Peugeot 307 hdi 110. lights left on battery died, put a new battery in. car keeps turning but won't start. immobliser light stays on


the car is imobalised, try disconectint the earth from battery for 5 mins and reconect, car should start

Dec 12, 2012 | Cars & Trucks

1 Answer

Injector for peugeot 307 hdi 1.4''


yes, and there are four injectors in peugeot 307 hdi 1.4.

May 01, 2010 | 2005 Peugeot 405

1 Answer

Peugeot expert when bracking crunching on


Don't know about what is reasonable in something other than USD, but pads are cheap and replacing them *can* be cheap - but remember it's always a good idea to re-surface the rotor when replacing pads (or the drums when replacing shoes on rear wheels).

If you don't, the new pads will quickly wear into the current grooving of the disc and lose a lot of useful life pretty quickly.

For stop-start city usage, it's not uncommon to require brake servicing after 30,000-35,000 miles (automatic trans) (or 48000-56000km).

-Ben

Dec 11, 2009 | 2005 Peugeot 405

1 Answer

Rear brake disc needs replacing


with car on stands use punch to remove pad retaining pins pull out pads can be tight remove 2 calliper retaining bolts move calliper away from disc remove disc retaining bolts remove disc check hand brake shoes and clean look for adjuster between shoes if it has one back it of some models just have hand brake cabel adjustment clean and fit new disc secure adjust hand brake shoes using screw driver through wheel bolt hole clean refit calliper slowley push back calliper pistons fit new pads refit retaining pins do other side pump up brake pedal check and adjust handbrake if neededcheck brake fluid level

Oct 20, 2009 | 2001 Volvo S80

1 Answer

Hi, my 307 hdi 2.0 79kw, accelerate to slow, my


Clean/Change air filter, fuel filter, air filter, turbo filter. Clean and check EGR valve and Turbo gate. Check the hdi fuel pressure. Open the injectors and clean it. Give it a try and may be you can save 600 euros.

Oct 17, 2009 | 1987 Peugeot Liberte

2 Answers

"when do i change the cam belt on a peugeot 307 sw diesel"


usually you should do it for peugeot diesel at 122000 miles along with water pump and the tensioner roller that runs under the cambelt too. But to be on the safe side do it at 100000 and save the fortune.
It took me (DIY job) about 6-8 hours as i wanted to save 450 pounds.

Apr 15, 2009 | 2005 Peugeot 405

2 Answers

Injectors


No, the size of the cars is different, so it wont work.

May 22, 2008 | 1989 Peugeot 405

Not finding what you are looking for?
1998 Dodge Durango Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...