Question about 2001 Volkswagen Golf

1 Answer

Engie reset on the Diagnostic machine even though there is no pro

My vw bora is showing no promblems on the Diagnostic machine but i would like to know if i can still have the engie reset as my car is lossing power and i beleive it to be something to do with having the engie reset

Posted by on

  • claire cooney Mar 08, 2009

    dose re-flushed mean re-maped as my car was re-maped not so long back but it is still lossing power if i turn the car off and on it seams to be ok again for a bit i read some one else had this problem and that after getting the engine reset the problem was no more. its something to do with the turbo boost sensor telling the engine management system that it's over boosting i just dont know what to do. is there any one that can help a girl out

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 214 Answers

Answer is No.. You may have it re-flashed ( ECM ) at the dealership

Posted on Mar 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bora fuse layout


Your can get wiring duagrams at Autozone.com for free when you register on their site. I understand another site, alldatadiy.com has similar data.

Even though popular, the VW may not be listed as it is a Foreign model. Sometimes you can browser search photos for a particular part on the internet.

I hope my solution is helpful.

Jun 08, 2012 | Volkswagen Bora Cars & Trucks

1 Answer

Interior light bulb on vw bora


In my vw bora 2001 the inside lights Downey come on and my boot don't open only with the key and my windows don't work what could be the problem

Apr 25, 2012 | 2000 Volkswagen Bora

1 Answer

Vw bora 1.6 2001 unsteady idle hot or cold does not matter, this problem has only started i dont no where to start looking for the fault. any ideas what could be causing this?


First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment (VAS, VAG-COM or similar) connected to the data link connector of the car, in order to pull out all DTC's memored. DTC = Diagnostic Trouble Code. Then you will bu full informed about the root cause of the problem, and you will be able to repair & replace bad pieces and reset the ECM.


Oct 21, 2011 | 2001 Volkswagen Golf

1 Answer

Cant open boot on X reg VW bora SE


sounds like the boot lock motor. this happened to my 2000 bora also. a new motor from vw dealer cost me €24.

May 24, 2010 | Volkswagen Jetta Cars & Trucks

1 Answer

VW bora 2002 Central locking The remote only


Try disconnecting the cars battery for a few minutes.Remember to have your radio code handy as it will go into safe mode.This should reset your convienience control unit[central locking] and it should operate as normal..good luck

Dec 28, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

Vw bora v5 10 valve starts up no problem but when you press the accelerater it wont rev its as though its on the limeter


im having the same problem with my bora? have you found out the problem yet if so could you tell me plz it would be very helpfull thanks darren ..

Oct 18, 2009 | 2001 Volkswagen Golf

3 Answers

Hi,my vw bora tdi has awarning light on the dash board,it bleeps for about 5 seconds then a message on the dashboard reads ENGINE WORKSHOP!and glow plug light keeps flashing,brake lights are working ok.


when the glow plug light keeps flashing.Thats telling you that you have a fault with one of the sensors.Take it to a garage and get it checked out with a diagnostic scan.

Jul 17, 2009 | 2003 Volkswagen Golf

1 Answer

Where is the diagnostic located in the vw bora 16 sr and where can i purchase a transmission for this same vw bora 16


Depending on the year of the car.....Usually the diagnostic plug is fitted in the centre consol.. A small plastic strip must be removed.....in front of the gear shift...below the radio.
Sorry I can not help with tranmission
John

Jun 30, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

How do i set the clock on my vw bora 2001


if you have a digital clock there should be a plastic pin coming from the clock,turn it to the left and hold for the hours and turn and hold to the right for the minutes.

Jan 15, 2009 | 2001 Volkswagen Passat

Not finding what you are looking for?
2001 Volkswagen Golf Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...