Question about 2000 Land Rover Discovery

3 Answers

Warning lights staying on after engine started

Electronic traction control light staying on, also hill descent control light and abs light, all three lights staying on after engine has started

Posted by on

  • Anonymous Apr 14, 2009

    i have the exact same problem. the warning lights staying on after engine started, all three.

  • Anonymous Mar 28, 2014

    no start and lights stay on

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

Posted on Apr 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Guys this is mike toronto working on discos range rovers
all same problems kleen abs sensors or replace upon condition
change abs-pump&bleed system & problem solved
i did all this on my disco 2 -year-00- range 02 &never had this problem done 6years ago

Posted on May 02, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

The "three amigos" (google it) is usually a faulty ABS Modulator, or a wheel speed sensor. Mine was a bad wheel speed sensor first, then a "Stuck Shuttle Valve" the second time ; when I bled the system and replaced the ABS Modulator.

Posted on Sep 03, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Traction control light is coming on going around bend at only 50 mph


VWVortex.com - Traction control light flashing, losing power?

forums.vwvortex.com > ... > VW Model-Specific Forums > Golf IV R32

May 20, 2011 - 25 posts - ‎14 authors
So last night I was driving home, went around a pretty sharp turn and my traction control light started flashing for about 5 seconds, then went ... Traction control and ABS light issues
15 posts
Feb 22, 2010
E-Brake warning light stays on -- help
22 posts
Sep 27, 2004
More results from forums.vwvortex.com

Abs and Esp Lights on!? - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=333091
Oct 18, 2011 - VW MKV-A5 Golf/Jettas. ... Suddenly i noticed that the ABS and the ESP light on the dashboard was on. ... Fuel Economy: 47+ Avg (Passat DSG) 50 Avg (SE Manual) Warm Weather. ... I might suggest that your ABS and traction controlpick up their information ... A bent ring or bad sensor will set both errors. On-and off grinding on hard left and traction control light ...
Nov 3, 2015
ABS brakes activating when slowing down - wheel speed indications ...
Jan 20, 2012
More results from forums.tdiclub.com

Electronic Stability Control - Auto Diagnosis Repair Help


Dec 17, 2015 | Cars & Trucks

1 Answer

Have a light come on after engine has started


Cluster warning lights

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, SRS and BCM faults) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, SRS Supplemental restraint system, BCM Body control module

Oct 08, 2012 | 2001 Volkswagen Beetle

1 Answer

ABS LIGHT AND TRACTION CONTROL LIGHT STAYS ON


ABS = Anti-lock Brake System.
TC = Traction Control System (Engine Control Module).
If the ABS lights on the dashboard permanently the ABS system is faulty. You must access the ABS & TC Electronic Control Units (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ABS ECU, in other words reset the ABS system and turn off the warning lamp on dashboard.

I suspect bad brake pedal switch, but you should scan the ABS & TC ECU's.

Jul 02, 2011 | 2001 Jaguar XJ8

1 Answer

Abs ,hill descent andtraction control lights all staying on .is it anything to do with the snow


No, it is a warning to you that your breaks are wearing away and need replacement.

Note that after you replace them, you will have to go to a computerised mechanical workshop to reset the abs detection settings to the computer detection system (Dont worry, the mechanics there will know what to do).

Nov 30, 2010 | 2002 Land Rover Freelander

1 Answer

1999 Freelander TC/DHD/ABS Lighs lit on dash


Read my post on landrover enthusiast comes under abs last resort lozzzz

Feb 22, 2010 | 2002 Land Rover Freelander

2 Answers

In my Land Rover Discovery 2000, the ABS, traction control and hill descent warning lights come on when sometimes on brake application other times no apparent reason when driving and then reset and behave...


you've got a bad wheel speed sensor or corresponding tone ring. take it to a dealer. they'll hook it up to a computer and tell you which sensor or tone ring it is and give you an estimate. you only pay for the hour of diag.

Oct 19, 2009 | 1999 Land Rover Discovery

2 Answers

ABS, traction control and hill descent warning lights come on when sometimes on brake application other times no apparent reason when driving and then reset and behave normally when engine is stopped and...


check abs sensors and controls for loose or damaged connections if none have vehicle scanned for fault or pending codes a part or sensor may be going bad at an auto store such as auto zone and advance auto do it for free

Oct 19, 2009 | 1999 Land Rover Discovery

2 Answers

Discovery warning lights staying on after engine started


try disconnecting the positive side of the battery for about ten minutes. My 2000 neon was doing the same thing. If there is no actual problem, electrically, then the lights should go out the next time the computer does a check of the car. Hopefully there is no actual issue. See if there is moisture around or in your fuse/relay box or dash. I'm not that experienced in the electronics department, so that is all the info I can in knowledge suggest.

Mar 08, 2009 | 2000 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

1,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...