Question about 1999 Ford Ranger SuperCab

1 Answer

1999 ford ranger door closure switch does not activate at times even though door is closed, seatbelt on, ignition switch on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

Take some WD40 and spray a liberal amount into the latch on the driver's door. Most of the time if the switch is sticking this will free it up. If not you will have to remove the door panel and replace the door adjar switch.

Posted on Mar 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car continues to ding even though seatbelts connected and doors are all closed


The door micro switches that also serves a housing for the locking mechanism have either failed or are stuck or worn out. This switches tells the ECU if the door is open (courtesy door light on) or off. It can be replaced buying the whole mechanism (VW OEM Part) or replacing the micro switch with equivalent switches (Non VW Part).

Sep 08, 2013 | 1999 Volkswagen Beetle

1 Answer

96ChryslerCirrus: 'door' warning vs odometer miles, Dome light stays on.


In the Ford Ranger, the light switch can be found in the door, right by the latch. You may need to use some WD-40 to get to work properly. -------------------------------------------------------------------------------------
zed bull

Nov 28, 2012 | 1996 Chrysler Cirrus

1 Answer

On 1999 ford ranger super cab makes chime every time driver door opens, even if key is out andights off. Is this suppose to work like this?


No, my '99 does not. I suspect the problem is in the ignition switch. For some reason our Rangers have very tight, sticky switches and need an occasional shot of graphite lubricant. Oil based lubricants or WD40 do not work well in any kind of key-switch. Spray it in the lock liberally and move the switch through all of it's detent stop sites, back and forth until it frees up.

Jan 24, 2012 | 1999 Ford Ranger SuperCab

1 Answer

I have a 1998 ford ranger and the door adjar wont turn off and the dome light stays on after i exit the truck.


make sure the seatbelt isn't getting caught in the door jam when you close the door, it could be enough to keep the door slightly ajar or.............. when you slam the door it's possible that another door/hatch could be popping open slighlty if the latch on that door is not 100% holding tight so check each one....good luck

Feb 13, 2010 | 1998 Ford Ranger SuperCab

2 Answers

The ignition bell wont stop ringing


You need to unplug the door harness one at a time to locate which door is causing the problem. Once the door is located, you can replace the switch which is located on the lock mechanism.

Sep 29, 2009 | 1994 Ford Ranger Supercab

1 Answer

2007 FORD RANGER TROUBLE CODES #B2292, B2293


These 3 codes have to do with restraint system.
B2292 Seatbelt pretensioner fault.
B2293 Passenger front airbag fault.
B2691 Seatbelt buckle switch circuit fault Ft.driver side.

Sep 18, 2009 | 2007 Ford Ranger FX4 Off-Road

3 Answers

Interior Light sometimes will not shut off in Ford Ranger Pick up


If I am not mistaken, the plunger is located in the door with the latch. Most of the time you can just pull the door panel off and adjust the switch. After opening and closing the door, they get knocked out of adjustment. I sincerely hope that this helped you. Take care and best wishes.
Bryon

Mar 20, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Key on engine running trouble code 55


Warning Chime Systems The generic electronic module (GEM) will sound the following warnings:
  • key-in-ignition warning
  • safety belt warning
  • headlamp switch ON warning
  • door ajar warning
------------------------------------------------------------------------------------------------
Headlamp Switch On Warning The generic electronic module (GEM) sounds when the driver door is opened while the headlamp switch (11654) is in the PARK or HEAD position, and continues to sound at a rate of 4 chimes per second until the headlamp switch is turned off or the driver door is closed.
  • When the headlamp switch is in the PARK or HEAD position, power is supplied through Circuit 293 (O/R) to the GEM.
  • When the driver door is open, the driver door open warning lamp switch (10B997)is closed and ground is supplied to the generic electronic module (GEM).
A delayed headlamps on repetitive chime will sound for a period of three seconds beginning twenty seconds after the key is turned to OFF, LOCK or ACC, the headlamp switch is in the PARK or HEAD position, and the driver door is closed. Delayed headlamps on is terminated by opening and closing the driver door again.
---------------------------------------------------------------------------------------
Door/Liftgate Ajar Warning The door/liftgate ajar warning functions as follows:
  • The generic electronic module (GEM) sounds a warning tone for one second when any vehicle door, liftgate window or the liftgate is ajar without any other door already open and the ignition switch is in the RUN position.
  • Power is then supplied through Circuit 627 (BK/O) to the door ajar warning indicator lamp which remains illuminated until all doors are closed or the ignition switch is no longer in the RUN position.
----------------------------------------------------------------------------------------------
Key-in-Ignition Warning The generic electronic module (GEM) sounds when the LH front door is opened with the key in the ignition switch and continues to sound until the key is removed or the door is closed.
  • When the key is in the ignition switch, the ignition key warning switch terminal and wire (11A128) is closed and ground is supplied through Circuit 158 (BK/PK) to the generic electronic module (GEM).
  • When the LH front door is open, the LH front door open warning lamp switch (10B997) closes and ground is supplied through Circuit 57 (BK) to the generic electronic module (GEM).
-------------------------------------------------------------------------------------
Safety Belt Warning When the ignition switch is turned to RUN or START from the OFF or ACC position and remains in RUN or START, the chime will sound for six seconds or until the safety belt is buckled. The safety belt warning indicator lamp (10C859) will turn on for 60 seconds, or until the LH front safety belt is fastened. Both the chime and lamp activate at the same time. If the safety belt is buckled when the ignition key is turned to RUN or START from OFF or ACC, the lamp will prove out for two seconds, but chime will not be activated. Any time the key is changed to RUN from START while the safety belt warning indicator is activated, the safety belt warning indicator will remain activated until either the timing sequence has been executed, or the safety belt is buckled.

Feb 25, 2009 | 1999 Ford Taurus

1 Answer

Ignition bell will not stop ringing


It was the seatbelt chime - our solution remove the module.

Thanks anyways

Jan 25, 2009 | 1995 Volvo 940

1 Answer

1999 Ford Ranger air won't blow out of vents, defrost, or floor


SOUNDS AS THOUGH YOU HAVE A BLEND DOOR STUCK CLOSED IN YOU HEATER / AC SYSTEM SOMEWHERE. CHECK THE VACUUM MOTORS THAT OPERATE YOUR BLEND DOORS ON THE SYSTEM.

Dec 04, 2008 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21986 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...