Question about 1993 Suzuki Swift

1 Answer

Engine temp goes above 100c and fan does not come

Holden BARINA sb 94 {SUZUKI SWIFT } model engine temp goes above 100c and fan does not come on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 21,949 Answers

Look for and change the thermo switch ,it should be in the radiator

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get to and remove my interior heater and demister fan on my 1994 holden barina swift


have a look at the heater box and if there are three screws holding a plate in place ( probably underneath ) with a diameter of around the fan size then by undoing these screws the fan and motor will drop out of the box.. Other than that a workshop manual will have the method of removing and replacing.

Sep 10, 2014 | 1992 Holden Barina

1 Answer

What could aSwooshing noise from engine area be?


All most sure to be a belt. spray some WD40 or similar on to the belts one at a time ,if it stops you may have to change it. Has the timing belt been changed and tension been checked , if not and it sounds at the engine front, that could be it.

Aug 05, 2014 | 1992 Holden Barina

1 Answer

Horn fuse location 1992 holden barina


Might be same as metros here. (they are cousins says wiki)
there are 2 fuse boxes, the main is under the hood.
next to battery this box FEEDS box 2.
box 2 was under the dash, just above left knee (LHD)
LHD = left Hand drive.

Mar 06, 2013 | 1994 Suzuki Swift

2 Answers

Hi ! I have a Holden Barina (1993 MH model) which is a Suzuki Swift rebadged. It loves to rattle when I accelerate, go up a hill and when under load. It doesn't rattle when its cold and when going...


Try some engine cleaner and that will help improve rough idle and or performance. To me it sounds like a possible motor mount issue. Sounds like the front engine mount. Because you explained up a hill rattle. / Down Hill\ no rattle. Engine lifts when going up hill and shifts downward while going down hill. hence no vibration because of gravity pull and the weight of the engine.

Aug 18, 2010 | 2000 Suzuki Swift

1 Answer

I need a free workshop manual for 1.3l 1991 holden barina to do a clutch and flywheel replacement.


http://www.teamswift.net/viewtopic.php?t=26290

This might be what you are looking for It is on an MK1 But i think it is the same for a Barina

If not search the site for lots of good info.

Oct 21, 2009 | 1993 Suzuki Swift

2 Answers

I was wondering where the fuel filter in my 1991 holden barina is located


LHF corner of the fuel tank under the car - roughly under the back seat.

Oct 15, 2009 | 1991 Suzuki Swift

1 Answer

Fuel gauge


Check the connections to the fuel sender are in good order, not loose, wet or corroded.
Check the fuel sender is properly grounded.
If no fault found as above, a new sender may be required.

Aug 05, 2009 | 1993 Suzuki Swift

Not finding what you are looking for?
1993 Suzuki Swift Logo

Related Topics:

665 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...