Need free wiring diagram for 1993 chrysler new yorker fifth avenue

Smoke is never a good sign. You need a good auto-electrician, get it towed.

The Fuse Box is old-school, but gives no clues.

https://www.autogenius.info/chrysler-new-yorker-1982-1983-fuse-box-diagram/

..

it's here

1990-93 Chrysler New Yorker Car Stereo Wire Colors and ...

www.the12volt.com > installbay > stereodetail

1990-93 Chrysler New Yorker Stereo Wiring ... If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond ...

General wiring diagrams

https://www.google.com/search?q=1990+chrysler+new+yorker+fifth+avenue+wiring+diagram&safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01glHxMWtJXi5sO_OSyQFKHbdXlOw:1619798227374&source=lnms&tbm=isch&sa=X&ved=2ahUKEwip4MzPqqbwAhXEG80KHTx6Ao8Q_AUoAXoECAEQAw&biw=1920&bih=937

..

How to get car wiring diagram Ricks Free Auto Repair Advice

I'm fairly sure a 1993 would use a speed sensor instead of a cable.
Either way, they plug into the side of the transmission.

These functions should be handled by the body control module, commonly referred to as a BCM. If you e-mail me with your e-mail address, I will check for you when I go back to work on Thursday and send you the info you are requesting. Car-part.com will list salvage yards in the U.S. and other countries that currently have the item in stock. Also, it might be a good idea to change the battery in your remote. Many times the problem lies here, especially in a vehicle of that vintage. My name is Jack, and my e-mail is [email protected]

IS THE FUEL PUMP THE CORRECT ONE STRANGER THINGS HAVE HAPPENED IT SHOULD BE THE FOLLOWING:

3.3L DENSO Part # 9533001
OE Replacement Module Assembly


3.8L DENSO Part # 9533001
OE Replacement Module Assembly

BE IN MIND THAT THESE ARE OE FOR THIS VEHICLE OTHER OPTIONS ARE AVAILABLE

pressed on you need a puller to remove it and to push it back on

belt diagram shuld be on the inside of the hood unless its been wrecked or replaced?

It seems to me that the fan relay may need replacing. If the contacts in the relay weld themselves closed, then the fan will stay on all the time. substitute the fan relay with another the same, to make sure that is the problem...hope this helps.

call a chrysler dealer and they can fax you a copy of the diagrams that you need