Question about 2003 Saturn VUE

1 Answer

Where are the spark plugs located on the engine

Spark plugs

Posted by on

  • yadayada
    yadayada May 11, 2010

    in the cylinder head hidden under individual coil's

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Look underneath the fuel rail under the coil packs inbetween the fuel injectors

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the spark plugs


Locate the spark plug wires in the Cherokee cylinder head. In the 4.0 liter engine, the spark plugs are below the coil rail assembly. On the 4.7 liter engine, the spark plugs are located under each corresponding engine coil.


Read more: How to Replace Spark Plugs in a Jeep Grand Cherokee ' eHow.com http://www.ehow.com/how_4484626_replace-spark-plugs-jeep-grand.html#ixzz27zi6736d

Sep 30, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Where is the spark plugs located for the 2002 4 cylinder highlander located. Plan on replacement.


First, remove the no. 1 engine cover. Locate the ignition coils, these will be squarish-looking packs with spark plug wires (4 of them) coming out. The wires should be going to the spark plugs, which are on the front and back side of the engine.
Grab the ignition coils or spark plug wires by the thick plastic piece at the end of the wire. Squeeze the end and turn it to release it from the spark plug. Pull back to remove the plug from the engine.
Slide the spark plug socket over the spark plug. The most common size of spark plug socket used on a Toyota Highlander is 16mm. Turn the socket to the left to unscrew and remove the spark plug from the cylinder well.

Mar 07, 2011 | 2002 Toyota Highlander

2 Answers

WHERE ARE THE SPARK PLUGS LOCATED ON MY 1999 PONTIAC GRAND AM


Hi. here's the procedure on how to replace your spark plugs. Spark plug location is in this procedure.

  • Park the car in cool, shady area and allow the engine to cool.
  • Step 2 Remove the parts of the Grand Am engine that hinder access to the spark plugs. For a 2.2 L engine, remove the ignition coil housing. For a 2.4 L engine, remove the bolts that hold the retaining ignition coil and disconnect the electrical connector. Pull the assembly straight up and away from the engine to remove it. For a 3.1 L engine, remove the air cleaner. For a 3.4 L engine, remove the windshield wiper module cover and rotate the engine for service access to the rear spark plugs.
  • Step 3 Locate the spark plug wire and grab it by the spark plug boot. Twist the boot in both directions and pull back to remove the wire.
  • Step 4 Insert the spark plug socket over the old spark pull and unscrew it from the cylinder well. Remove the old spark plug.
  • Step 5 Lubricate the threads of the new spark plug and screw it into the cylinder well.
  • Step 6 Test the tension and adjust it to the required setting. It needs to be 15 ft-lbs. for a 2.2 L engine, 16 ft-lbs. for a 2.4 L engine, 13 ft-lbs. for a 3.1 L engine, and 11 ft-lbs. for a 3.L engine.
  • Step 7 Reconnect the spark plug wire and twist it to lock the plug in place.
  • Step 8 Repeat Steps 3 through 7 for the remaining spark plugs.
  • Step 9 Replace all of the parts that were removed from the Grand Am in Step 2 to reach to the spark plugs.
  • Aug 12, 2010 | Pontiac Grand Am Cars & Trucks

    1 Answer

    Cant find the spark plugs


    Here's a link that will help you. I've included the info that you need to locate the plugs below. Good luck!

    http://www.ehow.com/how_4484637_replace-spark-plugs-oldsmobile-alero.html

    To gain access to the spark plugs and spark plug wires do the following. In a 2.4 liter engine, remove the ignition coil and module assembly from the top of the engine to gain access. In this Alero model's engine, the spark plugs run down the center of the engine. In a 3.1 liter engine, remove the air cleaner to gain access. The spark plugs are located next to the engine oil reservoir. For a 3.4 liter engine, remove the windshield wiper module cover and rotate the engine for service access. For a 2.2 liter engine, the spark plug wires are located across the top of the engine and require no components to be removed for access to the spark plugs.

    Mar 10, 2010 | 1999 Oldsmobile Alero

    1 Answer

    Location of spark plugs


    The spark plugs are located in the front upper half of the motor (4 of them). Each spark plug has a spark plug wire connected to it. The spark plug wires run from the drivers side of the engine to the spark plug so just follow the wires to each of the spark plug locations.

    Mar 06, 2010 | 1999 Chevrolet Cavalier

    2 Answers

    How to change spark plug where are they located at


    Your spark plugs can be located in 2 different locations.
    1 if your engine is sitting front to back of the vehicle your plugs will be located on the drivers side and the passengers side of the vehicle.
    2 if your engine is set from one wheel well to the other than your spark plugs will be located on the front of the engine ( front towards the bumper/grill.) and next to the firewall.

    4.6L, 5.4L & 6.8L Engines
    1. Disconnect the negative battery cable.
    2. Remove the coil on plugs as outlined under Ignition Coil in this section.

    3. Remove the spark plugs.
    4. Inspect the spark plugs
    5. Adjust the spark plug gap as necessary. Proper gap is 0.52–0.56 in. (1.32–1.42mm).

    installation.
    1. Install the spark plugs and tighten them to 13 ft. lbs. (18 Nm) for 4.6L and 5.4L SOHC engines. For 5.4L DOHC and 6.8L engines, tighten the spark plugs to 15 ft. lbs. (20 Nm).
    2. Install the coil on plugs.
    3. Connect the negative battery cable.

    Jan 09, 2010 | 2002 Ford Expedition

    2 Answers

    Where are the spark plugs located in a 03 hyundai santa fe??


    To locate and change the the (4) spark plugs on a 2003 Hyundai 2.4L 4 cylinder engine:
    Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
    Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
    Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.

    Nov 21, 2009 | 2003 Hyundai Santa Fe

    1 Answer

    Change sparks plugs on 06 hyundai sonata v6


    You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

    Jul 08, 2009 | 2006 Hyundai Sonata

    1 Answer

    Cant find the spark plug location on 2002 4cyl tacoma


    Locate the spark plug cover on the engine.On some Toyota Tacoma engines, the cover is across the top of the engine. On others, it is along the side 4 cyl. Remove the cover to reveal the ignition coils and spark plugs wires. The spark plug wires are plugged directly into the engine and the ignition coils are in the tip of the spark plug wire.
    Remove the coil and wire from the spark plug. Twist and pull the plug out of the engine. Remove the spark plug from the cylinder well with a socket extender and socket wrench. Turn the wrench to the left to unscrew the spark plug from the engine.

    Discard the old spark plug and apply a coat of anti-seize compound to the threads of the new spark plug.

    Insert the new spark plug into the socket. Use the socket and extension to screw the spark plug into place.

    Return the ignition coils and spark plug wires to the engine and turn it to lock the plug in place. Repeat the entire the process with the remaining spark plugs.

    Replace the spark plug cover when all of the spark plugs are replaced.

    Good luck and hope this helps and The spark plug tension may range between 11 and 15 foot pounds, depending on the size of the spark plug. The correct tension is indicated on the spark plug's packaging.

    Apr 19, 2009 | Toyota Tacoma Cars & Trucks

    1 Answer

    I can't find the spark plugs in my 2005 sonata


    To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine:
    Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
    Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
    Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.
    Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place.
    To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place.
    Repeat same procedures for spark plugs number (3) and (4).
    Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold.


    please rate!

    Mar 18, 2009 | 2006 Hyundai Sonata

    Not finding what you are looking for?
    2003 Saturn VUE Logo

    Related Topics:

    281 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    61037 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...