Question about 2002 Mercedes-Benz C-Class
Mercedes c200 sport
Faulthy sensor or a relay, try to reset, by dis/re-connecting the ground cable from the battery, remove the ground cable ( - not the +) wait 1 minute reconnect the ground cable.
Posted on Aug 11, 2009
The EIS (Electronic Ignition Switch) is malfunctioning. You will have to replace the EIS and take the car to a dealer to reprogram the keys.
Posted on Sep 12, 2009
SOURCE: Hi, I just got a series
There is a short in the connections so the hazard lights are flashing.
The hazard flashers may begin flashing by themselves or the turn signals may flash at twice the normal speed due to condensation shorting out the circuit board.
Have you tried disconnecting the car battery, then turning the ignition on and reconnecting the battery? If not then please try this and check.And see if that makes any difference in the problem or solves the problem.---------
Also you can try disabling the hazards from flashing. To stop the hazards flashing pull the hazard switch out (pull the gear leaver gaiter out then you can put your fingers under the switch and push it out) then you will see a single wire in a black sleeving, cut this wire and this will stop them flashing.Also the alarm is behind the glove-box if you want to unplug it there.
Keep updated for anymore query.Thanks.
Posted on Oct 12, 2010
Tips for a great answer:
Nov 10, 2016 | Mercedes-Benz Cars & Trucks
Oct 17, 2014 | Mercedes-Benz Mercedes Benz A Class Maisto...
Jun 13, 2011 | Mercedes-Benz C-Class Cars & Trucks
Oct 12, 2010 | BMW 323 Cars & Trucks
Sep 12, 2009 | 1994 Mercedes-Benz C-Class
Aug 08, 2009 | 2002 Mercedes-Benz C-Class
Jul 06, 2009 | 1995 Mercedes-Benz C-Class
Mar 15, 2009 | 2000 Mercedes-Benz C-Class
Jan 27, 2009 | Mercedes-Benz C230 Cars & Trucks
726 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: