I have a 95 isuzu rodeo v6 3.2L 4x4 ..i just replaced the oil cooling hoses(upper and lower)..now when the engine warms and the thermostat opens coolant appears to be leaking from between the motor and the transmission.. i dont know what this could be.. any one have any suggestions/// pllease send them to firstname.lastname@example.org..... thanx
I have a 98 Trooper leaking engine coolant from above the the oil pan and can't see where the source is. It leaks alot after it has been parked for several hours, and very little when the engine is running.
All hoses have been replaced and no change.
The dealer replaced the water pump at 130K miles, now have 170K.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
where is such a simple word
3.2L V6, SOHC head 6VD1 (not the 6vd1w twin cam heads)
x marks the spot
asked many time here, and same answer.
if you look , you see it, then see its not possible to get to the 2 rear bolts (telling you what?)
pull engine block, ? no
pull intake, yes.
with my experiance on these engines it's usually the upper outlet hoses running from the heads into a t then into the upper radiator hose they are pain to replace but 3 out of 3 of my v6 isuzu's have had the same problem you'll have to pull off the theromstat and the coil pack the hoses are very small and run from the end of the heads one on each into a t then into the radiator hose just under the housing
Recheck the connection of the upper hose that leads to the engine side with particular attention to the lip of the metal tube. In most instances, it would be the hos not pushed in properly or a clamp that is not tightened wholly encompassing the hose. Additionally, you may want to check the thermostat housing for any cracks/leaks.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.