- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Position the inner edge or the exterior rear view mirror glass to its maximum travel.
WARNING: Place a shop towel between the exterior rear view mirror glass and the hand to avoid personal injury in the instance of glass breakage. Grasp the outboard edge of the exterior rear view mirror glass and pull outward.
Remove the exterior rear view mirror glass.
If equipped, disconnect the heated rear view mirror glass electrical connectors.
If equipped, connect the heated rear view mirror glass electrical connectors.
NOTE: An audible click will be heard during installation. Press firmly in the center of the exterior rear view mirror glass until it snaps onto the exterior rear view mirror motor.
As the owner of a 2001 Grand Prix GTP I can tell you that the mirror you speak of is not terribly difficult to replace, but you need the tools to remove the inside panels in the front corner of the window to get to it. Once you get that off there should be three bolts/nuts that hold the mirror on and if you have power mirrors then of course you'll have an electrical connector in there as well.
I dont have any instructions wrote up but there is a Grand Prix car club forum you can check that may have some information on how to replace it in more detail. You can go to grandprixforums.net, sign up and post up your problem and Im sure someone there will probably have specific instructions.
there should be a plastic cover on the inside of the car where the mirror is take this off and there will be a connector block unplug this and there should be screws undo them and the whole thing should come off themn and you should be able to seperate them then.