Question about 1998 Dodge Intrepid

1 Answer

No Start Replaced Cam Sensor Now Runs But Rough

1999 Intrepid 2.7 v6 bought car after it had died while driving i replaced the spark plugs still no start so then i replaced the cam positioning sensor it now starts but miss fires like crazy

Posted by on

  • just_me_584 Mar 09, 2009

    i have coil packs and a trouble code for cylinder 2 miss fire and coil circuit malfunction (b) the coil seems fine could it be the wire harness

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

I don't know if you have a coil pack or spark plug wires but this is what you need to check for the miss you can also try this website if needed for diagrams and instructions autozone.com or your local library

Posted on Mar 08, 2009

  • edgar walker
    edgar walker Mar 09, 2009

    most times you can replace the boot on the bottom of the coil pack instead of replacing the whole coil pack also ask at the auto parts place for a small pack of grease to go on the end of the boot before putting it back on the spark plug

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 dodge intrepid stalls and rough idle. When I floor it the car will fall on its face. Hesitation after I come to a stop. Shakes and idles very rough, battery is also dying often. Replaced the cam and...


Check fuel pressure. Air filter could be really clogged, usually they will collapse first. Then check for exhaust pressure out of the tail pipe. Little pressure or it's really hot. The catalytic converter/s are plugged up.

Mar 18, 2015 | Dodge Cars & Trucks

2 Answers

1998 Dodge Intrepid 2.7 -- After running for 30 minutes, the car starts and runs rough. Driving up to temperature it runs fine. After sitting for 15 minutes or so, when starting it runs rough and will...


it sure sounds like you have an EGR problem. This valve controls the flow of unburned exhaust gases and re-routes them too the intake to be re-burned. This valve is usually open at highway or cruise speeds. Not usually open at idle. If this EGR valve is open at idle, you get a rough running for sure just like a mis fire and will smooth out as your speed increases. I would get that checked out and if faulty, replace. Please keep in mind that this part is quite expensive new, but it is electrically controlled. good luck!

Aug 25, 2010 | 1998 Dodge Intrepid

1 Answer

Code says there is a problem with the camshaft sensor. Occassionaly the check engine light comes on and the car stops running or runs very rough


I also have a 04 intrepid with the 3.5L engine. mine did the same thing. I replaced my cam position sensor. Bought it at autozone for $30 and replaced it myself. It's located in your timing cover in front of the engine under your upper intake. Never had another problem after replacing it.

I hope this helps

Aug 05, 2010 | 2004 Dodge Intrepid

1 Answer

99 Dodge Intrepid 2.7L no power to ignition. Receiving Code P1684 but battery connection okay.


I have a problem with a 1999 Dodge Intrepid 2.7. Looking for some help or suggestions.


Problem: I only have a spark from the #2 coil.


Background:


Vehicle purchased from an Auction and would not start. The vehicle would only backfire. When I removed the valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not sure if I used the original primary (left) cam sprocket from the 1999 or one I purchased in a kit from a Dodge dealership. I tried to use the new primary timing chain but it was not the same. The replacement heads were surfaced and a new head gasket was used. When I tried to start the vehicle it had no spark. The vehicle had set at several locations and parts may have been removed or changed.


Solutions Tried:


I tried 4 ASD relays with no effect. I then tested all 4 on a 2002 Intrepid 2.7 that runs and all worked. I then discovered that the Crank PS has missing. I replaced the Crank PS with one from a 2002 Intrepid 2.7 with no effect. I then replaced the Crank PS with a Crank PS from a 1999 Intrepid 2.7 and got a spark at the #2 coil only. I then replaced the PCM and TCM from the same 1999 Intrepid I got the Crank PS from and still only have spark from #2 coil. I then changed the Cam PS, still spark only from #2 coil. I have tried several coil packs on connector #2 and all have spark. Each coil pack that sparks on #2 will not spark on any other connector. Spark from #2 coil is weak.


I then replaced the wire harness from the PCM to the coils and fuel injectors and still only have spark from the #2 coil. What am I missing? Any suggestions, advice or related information will be greatly appreciated!


Thanks!

Keith P. Richardson

Kpricha2@yahoo.com

404-606-0728

May 20, 2010 | 1999 Dodge Intrepid

1 Answer

Hello Experts, 1999 Chrysler Sebring LXi v6 2.5L. Car had a hard time starting. It would turn over but not start. When it did start, it would run and idle fine for about 4 minutes and then die. I've...


to reset the computer simply unplug the battery for about 30 minutes.

However, you have a different problem I believe. you need to check your plugs and wires/coil packs. A fouled spark plug will cause rough running at any speed.

Oct 15, 2009 | 1999 Chrysler Sebring

1 Answer

Won't run


There are to many things that can cause the no start. Here is a link that can help you understand the possible problems and links to how to retrieve the DTC codes which is activating your Auto Shutdown relay.
Good luck and hope this helps. Keep me posted http://www.allpar.com/fix/stall.html

May 26, 2009 | 1999 Dodge Intrepid

1 Answer

Rough start on 2001 escape


how about a simple tune-up?  Plugs and filters.

Mar 28, 2009 | 2001 Ford Escape

1 Answer

Won't start


check for spark and please email me at meanness628@aim.com with any other info or questions

Sep 18, 2008 | 1999 Dodge Intrepid

Not finding what you are looking for?
1998 Dodge Intrepid Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...