2004 Ford Freestar 4.2 lt SE " She Won't Turn Over"
I have a 2004 Ford Freestar 4.2 Lt SE, she won't turn over, the battery is fully charged and the starter is brand new and I had to hook up a wire to the Soluoid nut and use the wire on the battery to start it up , but now she won't start! Please Respond ASAP, thank you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your van was equipped with a trailer/camper adapter or not, the left turn signal connection is LT GRN/ORG; the right turn signal connection is ORG/LT BLU; the marker lamps connection is BRN, and the stop lamp connection is LT GRN
Theres only 1 way to tell if it will work - try it :)
Here is the procedure to marry a new remote to your truck.
1. Close all doors and then open drivers door and press
the UNLOCK button on drivers door panel while door is open and insert
key in ignition. 2.Turn ignition
from OFF to RUN (not start) 8 times within 10 seconds, with the 8th time ending
in RUN. Door locks will cycle to confirm programming
mode. 3. Within 20 seconds press any button on first keyless
remote. Door locks will cycle to confirm
programming. 4. Within 20 seconds, press any button on second keyless
remote. Door locks will cycle again to confirm
programming. 5. Turn ignition to OFF. Locks will again cycle
to indicate end of programming mode.
Both the Escape and LT program the same - the transponder should have the same resistance.
Try it out!!
Thanks for using FixYa - a Very Helpful Rating is appreciated for answering your FREE question.