Question about 1997 Infiniti.5 J30

1 Answer

Do I need to remove the timing chain in order to replace the water pump in a 97 Infinity J30?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Rubber timing belt will need removed in order to service the pump on that vehicle

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the thermostat location on my infinity j30 1993


Chris, 1993 infiniti J30 thermostat location. Follow large radiator hose to intake manifold by water pump, at the end of the rad hose is the thermostat housing. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace the Thermostat in an Infiniti J30 eHow
Thermostat Replacement Write Up
Infiniti Thermostat Replacement

Aug 28, 2016 | Cars & Trucks

1 Answer

How to change a timing chain on a 1994 Infiniti j30


Everything has to come off the front of the engine. That's the easy part. Setting the timing is the most important part. You really need a manual for this job. And follow the manual when resetting the timing. If the water pump is in there also, replace it. You only want to do this one time.

Aug 22, 2015 | Infiniti Cars & Trucks

1 Answer

How do i change a water pump on 97 grand am gt 2.4l


you will need to replace the timing chain and timing chain tensioner and timing cover gasket

Nov 03, 2012 | Cars & Trucks

2 Answers

Where is the water pump located on a 97 olds achieva 2.4 dohc engine


It is timing chain driven, (under the timing cover, right side of car) but bolted on rear right of engine, you have to remove the timing chain to replace the water pump

Feb 09, 2011 | Oldsmobile Achieva Cars & Trucks

2 Answers

I have 97 pontiac 2.4 changing water pump have everything unbolted but water pump wont slide out. why?


YOU HAVE TO REMOVE TIMING CHAIN COVER. THE PUMP IS CHAIN DRIVEN,RELEASE PRESSURE FROM TENSIONER AND REMOVE CAINFROM PUMP .BE CAREFUL NOT TO MOVE GEARS

Nov 06, 2010 | 1997 Pontiac Grand Am

1 Answer

I30 1996 INFINITY WATER PUMP LOCATION


Hi, you have to remove the timing chain cover and then remove the timing chains to get to the water pump which is located beneath it.

Take care

Aug 11, 2010 | Infiniti I35 Cars & Trucks

1 Answer

How to replace water pump on 2.4 chevy cavalier


This is a job for the dealer or cerified mechanic. The front cover and timing chain needs to be remove to access the water pump mounted behind the engine. The pump is driven by the timing chain and timing will need to be reset using special tools.

Jul 20, 2009 | 1998 Chevrolet Cavalier

1 Answer

My 97 cavalier needs a new water pump. it has a2.4 l dohc 5 spd. do i have to remove the timing chain cover to fix?


yes you must remove the timing chain cover, timing chain, timing chain case, and exhaust manifold, takes about 6 hrs to change, I know I got the same motor and car, good luck and have fun, also you will need to buy a gasket set for the timing chain

May 18, 2009 | 1997 Chevrolet Cavalier

1 Answer

I am replacing the water pump of my 1995 3.0 v6 infinity (same as altima) but my son removed the chain with out marking it, now I need to set the timing. How do I do this? There's marking on the valve...


This should be the same engine as the Maxima. If that is the case, there is no reason to remove timing chain or get it out of time. The pump is driven by the timing chain, but is not "in time".

The pump is under its own cover. The chain tensioner is under its own cover. The pump is removed after the tension is released on the chain, the tensioner pinned in its retracted position to take tension off chain, and the crank is rotated about 20 degrees counter clockwise to slacken the chain at the pump sprocket without coming off the cam sprockets. Then, the pump is remove by removing its mounting bolts and then screwing in three long M8 bolts as jack bolts into 3 holes (carefully and evenly) to jack out pump. The pump is sealed from the engine case by two o-rings that must be replaced. I think the pump mount bolts are sealed with silicone when replaced. I would get a Haynes or other reliable manual.

If you truly have to reset or check timing, definitely get a book.

Jan 12, 2009 | 1995 Nissan Maxima

1 Answer

How to set the timing chain


line the marks on the chain to the sprokets and it should be ok, is that what we call a qx, a32 chassis seires?

Jan 12, 2009 | 1995 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...