Question about 2000 Ford Windstar

1 Answer

RIGHT STOP LIGHT WORKS IRREGULARLY(2002 FORD WINDSTAR)

LEFT STOP LIGHT WORKS WITH BOTH IGN ON AND OFF.
RIGHT STOP LIGHT
1. WITH IGN ON, BULB OUT OF SOCKET, WITH BREAK PEDAL DOWN, THEN PUT BULB IN SOCKET, LIGHT COMES ON AND GOES ON AND OFF WHEN PEDAL ACTIVATED. THEN AFTER A FEW TIMES IT STOPS WORKING.

2. WITH IGN OFF, BULB OUT OF SOCKET, WITH BREAK PEDAL DOWN, THEN PUT BULB IN SOCKET, LIGHT COMES ON AND GOES ON AND OFF WHEN PEDAL ACTIVATED THEN AGTER A FEW TIMES IT STOPS WORKING.

3. WHEN YOU CHANGE IGN SWITCH FROM ON TO OFF, THIS IS WHEN BOTH 1 AND 2 ABOVE MAKE THE BRAKE LIGHT STOP WORKING.

4. ???????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thereis three switches to check one is the muti function switch. the second is the headlight switch and third is the brake switch on the pedal.if not them check your ground and see if it is secured properly

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Ford 2001 Windstar LX Van. A yellow light, looks like upsidedown light bulb, with explanation point in middle. What does this mean???? Please help driving to Ohio and light just cameon???????


Linsey, It may be lamp out indicator, check all your bulbs to find which one is not working. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Fix Your Ford With Your Own Hands
2001 Ford Windstar Car Light Bulb Size Diagram ModifiedLife com
Front Turn Signal Change Ford Windstar 1999 2003 2002 Ford Windstar SEL 3...

May 05, 2016 | Ford Cars & Trucks

1 Answer

Why is my right headlight is not working on a 2002 windstar van?


try swapping left headlight to right side. then you can tell if its a bad bulb or a fuse thats blown. good-day!

May 05, 2014 | 2000 Ford Expedition

1 Answer

License plate lights do not work. Bulbs changed still does not work. The right brake light does not work. Changed bulb and plug. Turning signals work, tail lights work. All works on the left side.


Well for the license plat you might wanna check the fuse. and the brake light if one works fine then I'm sure you need a new bulb in the other side. Good luck

Jan 09, 2011 | 1999 Ford Windstar

1 Answer

99 windstar right rear turn-signal won't blink. Fuse & bulb good checked fuse under hood & under dash. Moved bulb from left to right side & also moved sockets around.


If the bulb works in another socket you have a short in the socket or a open in the circuit. Check for corrosion at all terminals were the bulb makes contact and make sure the contacts are meshing to the bulbs contacts too

May 11, 2010 | 1999 Ford Windstar

1 Answer

We have a 2001 Ford Windstar and noticed today that none of the rear lights are working. Is there a fuse that may have blown for this to happen all at once or something else?


There is brake switch that is located on the brake oedal bracket, just to the right of the steering column mount. Youl need to remove the left side under dash panel to get to the switch and connector.
If the brake lights are inoperative, check the fuse.
If fuse is Ok, check the voltage at the light bulb socket when switch is not presed and when is presed. If there is no voltage back to the light bulb replace brake switch.

Feb 20, 2010 | 2001 Ford Windstar

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

The 2001 Windstar's left front turn signal and left rear back up light do not work. the bulbs are known to be good. any ideas?


Check for powers and grounds right at the sockets.This is a very easy to do with a cheap test light.

Jan 07, 2010 | 2001 Ford Windstar

1 Answer

My left headlight highbeam light works and the lowbeam don't why


the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.

Sep 07, 2009 | 1998 Ford Windstar

1 Answer

Turn indicator light flashes quickly. bulbs fine


The quick flash is a fault detection for a burnt out bulb. If bulb is good, check bulb socket. Inspect for corrosion. If needed, replace bulb socket. Check bulb socket connector. Check if fuse. Check emergency flashers ( most cars have a separate circuit).

Jul 09, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...