Question about 1995 Plymouth Voyager

1 Answer

Tie rod end removal for 1995 plymouth voyager mach 3

I can't seem to find the mechanics manuals for a 1995 Plymouth Voyager Mach 3. I need to find the info on the removal of the tie rod ends so that I can follow it. I am just a bit rusty on the process and I don't want to miss something.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

Not too much to it, Crack jamb nut loose at threaded end where it threads onto. Pop/whack, it out of spindle/knuckle, after removing cotter pin & nut, thread it out, and new one on, same distance, or amount of threads, and tighten jamb nut against it. Push end back into spindle/knuckle, give light tap with nylon or rubber hammer, so it won't spin when trying to tighten nut & install nut (35 ft.lbs) & cotter pin.

Posted on Mar 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Im looking for a transmission wiring diagram for a 95 plymouth voyager se with the 3.3l engine

Plymouth Voyager Repair Manual / Service Manual Online ...

? 0:43
Dec 14, 2014 - Uploaded by Tanner Jackson
If you need a Plymouth Voyager repair manual, you're in luck. ...steering, suspension, engine, transmission, air conditioning, heater, or something ... 1994, 1995, 1996, 1997, 1998, 1999, 2000 (90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00) .... Plymouth VoyagerDodge Caravan 1996 19971998 1999 2000 3.3L ...
images for wiring diagram plymouth voyager

Nov 28, 2015 | Plymouth Cars & Trucks

1 Answer

Half Shaft

pull off hub cap remove circlip in the nut if there is one, then loosen axle nut. Need a breaker bar and wheel on the ground. once nut is off loosen lug nuts, jack up car on side . bolts #10 Tork on some models then remove. Remove lower tie rod end remove bolt and nut. remove rotor and 2 Caliper pull out on the bolt. push lower control arm down with a bar and pull strut Assembly out away from car. next pull axle out using a flat bar to shove the axle out of transmission. install is in reverse.

Mar 23, 2010 | 1996 Plymouth Voyager

1 Answer

Need a owners manual for a 1995 Plymouth mini-van. Recently bought this van which did not have a manual. Would surely appreciate any help you could provide. Thanks alot, Fred.

hope this helps! but please before posting on forum google the problem.

Feb 17, 2010 | 1995 Plymouth Voyager

2 Answers

Search an user manual for a plymouth voyager mod95 v6 3.0 for download

Can check this information in:
- (free register): Covers all U.S. and Canadian models of the Chrysler Town & Country, Dodge Caravan and Plymouth Voyager 1984-1995.
- 1995 Plymouth Voyager Owners Manual (for sale)

I hope helps with this (remember rated this help). Good luck.

Dec 31, 2009 | 1995 Plymouth Voyager

1 Answer

It is really hard to make turns. check power stering fluid ok

check power steering fluid if real real low you have a leak at hoses or pump seals.if all is good check for low tires and lack of lubrication to at ball joints and tie rod ends. if all is good you have power steering pump failure.

Apr 22, 2009 | 1998 Plymouth Voyager

1 Answer

What is it called? bar from strut to stabilizer arm?

If on the front end, you will have the spring, with the strut coming down in the center, then you will have a sway bar with a thin rod that connects to the arm, then you will have a small rod coming straight out with a boot and nut on the end at a 90deg angle, and that will be the tie rod and tie rod end. And in the center of the wheel will be your axle, I hope I described what you are looking for. Good luck

Feb 22, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Tie rods nuts size for grand voyager 1999 3.3

Don't take any chances. Replace the tie rod and or tie rod end and have the toe in reset. If that comes apart you will not be able to steer the van and will likely cause more damage.

Dec 27, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
1995 Plymouth Voyager Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides