Question about 2003 Dodge Durango
2003 Dodge Durago Sport...First the back two power windows stopped working, then the front passenger side window stopped working a couple days later. Then a day later the drivers side window that just had a new motor put in it six months ago stopped working. Also the power locks switch on driver side stopped working. However the power lock switch on the passenger side still works. Fuses are still good... Could someone lead me in the right direction on this problem???
Not sure if this is of importance, but before this all happened, the check engine light was on for months and then when all of this happened, the check engine light went off...
I know its not what anyone would want to here but sounds like a short. Best thing to do is first wiggle your key switch when the vehicle in in the on position then at the same time try to check to see if locks or windows are working. Then do the same in while the rig is running. If that dont work your ignition is fine and you need to take off door panels and check and wiggle all conections on window motors and lock motors and look for melted or burt wire or some that might have got hot. If all is good there you need to go to the back of the fuse box were the fuses to those items plug in and check there. As far as the service engine light goes either take it to the nearest Schucks or AutoZone and they will check it for free if not cycle the key on and off 3 times and on the 3rd time leave it in the on position look at your odometer light and it will flash a code remember that code and type Dodge then the code on yahoo search and it should tell you why your light is on Hintz whay sensor is bad. Hope this helps.
Posted on Apr 05, 2009
Tips for a great answer:
May 20, 2011 | 2000 Dodge Durango
Jul 23, 2010 | 2003 Dodge Durango
Apr 07, 2010 | 2003 Dodge Durango
Sep 03, 2009 | 2003 Dodge Durango
Aug 06, 2009 | 2003 Dodge Grand Caravan AWD
Apr 29, 2009 | 2003 Dodge Grand Caravan AWD
Mar 18, 2015 | 2003 Dodge Durango
507 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: