Question about 2000 Jaguar S-Type
You WILL have to remove the intake manifold to get access to the coils and plugs on the right bank.
prepare with new gaskets for the manifold and go nutz!
Fred from Sweden.
Posted on Mar 13, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Jaguar S-Type Battery
I had to change the battery in my 1999 S-Type, you will need the radio code, I also needed to reprogramme the board computer which is easy if you have your manual at hand, also the car might act strangely for a while, but this is explained in your users manual, nothing to worry about.
Hope this helps.
Posted on Oct 12, 2008
i also have the same problem regarding the oil leak. this is due to the spark plug gasket leaking and you will need to replace them. they are circular gaskets about 1.5 inches across that fit to the underside of the rocker covers and prevent oil from seeping down the long spark plug hole. when i investigated my leak i assumed it was just the rocker cover gasket that was leaking but once everything was removed it is obvious.
Posted on Jan 12, 2009
You can check the input voltage at each coil. This way you make sure you have the proper amount to operate. Disconnect the six ignition coil connections. Turn the ignition key on. Check the voltage at Cyl #1 B/Y wire, Cyl#2 B/U wire,Cyl #3 B/O, Cyl#4 B/G, Cyl#5 B/R, Cyl#6 B/W and ground. It should be 10.5V or higher. If not,you need to find the cause of the voltage drop.
If ok, you can test the resistance of each coil. At the coil,measure the resistance across the primary windings.It should measure between 0.50 Ohms ans 1.00 Ohms.
I hope this information is helpful.If you need anything else,don't hesitate to ask. Thanks,Chuck.
Posted on Jan 02, 2010
Testimonial: "This is a great service you guys provide, keep up the good work. Thanks pablo "
Once the plastic covers over the valve covers have been removed you will see the coli packs. Remove the 2 screws holding these in place and this will give you direct acess to the spark plugs.
Posted on Mar 03, 2010
Tips for a great answer:
Oct 14, 2017 | 2000 Jaguar S-Type
Apr 11, 2011 | 2000 Jaguar S-Type
Mar 03, 2010 | 2000 Jaguar S-Type
Feb 20, 2010 | 2000 Jaguar S-Type
Nov 21, 2009 | 2000 Jaguar S-Type
Oct 05, 2009 | 2000 Jaguar S-Type
Apr 22, 2009 | 2000 Jaguar S-Type
Jan 10, 2009 | 2000 Jaguar S-Type
Jan 06, 2009 | 2000 Jaguar S-Type
813 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: